Urethane Structural Adhesives

This Pneu-Wear PC 7455 surface protective coating is blue and comes in a pail. It meets the standards for ASTM D2440, ASTM D695. This surface protective coating features can be applied to itself, easy to mix and apply, extends wear life, small ceramic bead filled, non-shrinking and includes resin and hardener. In addition, it has a working time of 10 minutes. It is not water-resistant.

This Pneu-Wear PC 7455 surface protective coating is blue and comes in a pail. It meets the standards for ASTM D2440, ASTM D695. This surface protective coating features can be applied to itself, easy to mix and apply, extends wear life, small ceramic bead filled, non-shrinking and includes resin and hardener. In addition, it has a working time of 10 minutes. It is not water-resistant.

This Pneu-Wear PC 7317 surface protective coating is grey and comes in a pail. It meets the standards for ASTM D2240, ISO 11359-2, ISO 527-2, ISO 604. This surface protective coating features abrasion resistant, easy to mix and apply, prolongs equipment life, renews worn surfaces, small ceramic bead filled and includes resin and hardener. In addition, it has a working time of 30 minutes and has a tensile strength of 2,550 psi.

This Pneu-Wear PC 7317 surface protective coating is grey and comes in a pail. It meets the standards for ASTM D2240, ISO 11359-2, ISO 527-2, ISO 604. This surface protective coating features abrasion resistant, easy to mix and apply, prolongs equipment life, renews worn surfaces, small ceramic bead filled and includes resin and hardener. In addition, it has a working time of 30 minutes and has a tensile strength of 2,550 psi.

This emblem adhesive begins to harden in 10 to 20 minutes and is fully cured in four hours. With a urethane base, this press-in-place emblem adhesive has a high-strength bond and measures 2 inches x 12 feet.

This emblem adhesive begins to harden in 10 to 20 minutes and is fully cured in four hours. With a urethane base, this press-in-place emblem adhesive has a high-strength bond and measures 2 inches x 12 feet.

J-B Weld Plastic Bonder Black Syringe is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete & more. Plastic Bonder has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, Plastic Bonder sets to a black color and cures to a hard, permanent bond.

J-B Weld Plastic Bonder Black Syringe is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete & more. Plastic Bonder has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, Plastic Bonder sets to a black color and cures to a hard, permanent bond.

Urethane structural adhesives provide a more flexible bond compared to other structural adhesives like epoxy and acrylic. They are best for use in applications that experience impact and vibration.

Urethane structural adhesives provide a more flexible bond compared to other structural adhesives like epoxy and acrylic. They are best for use in applications that experience impact and vibration.

This U-05FL urethane adhesive is Off-White and comes in a dual-cartridge. It meets the standards for ASTM D1002, ASTM D638. This urethane adhesive features high peel strength, high shear strength, industrial grade, medium viscosity and includes resin and hardener. In addition, it is for use with dual cartridge applicator, it has a working time of five minutes and has a tensile strength of 1,300 psi.

This U-05FL urethane adhesive is Off-White and comes in a dual-cartridge. It meets the standards for ASTM D1002, ASTM D638. This urethane adhesive features high peel strength, high shear strength, industrial grade, medium viscosity and includes resin and hardener. In addition, it is for use with dual cartridge applicator, it has a working time of five minutes and has a tensile strength of 1,300 psi.

Urethane structural adhesives provide a more flexible bond compared to other structural adhesives like epoxy and acrylic. They are best for use in applications that experience impact and vibration.

Urethane structural adhesives provide a more flexible bond compared to other structural adhesives like epoxy and acrylic. They are best for use in applications that experience impact and vibration.

This Pneu-Wear PC 7226 surface protective coating is grey and comes in a can. It meets the standards for ASTM D2240, ISO 11359-2, ISO 527-2, ISO 604. This surface protective coating features abrasion resistant, easy to mix and apply, prolongs equipment life, renews worn surfaces, small ceramic bead filled and includes resin and hardener. In addition, it has a working time of 30 minutes and has a tensile strength of 2,550 psi.

This Pneu-Wear PC 7226 surface protective coating is grey and comes in a can. It meets the standards for ASTM D2240, ISO 11359-2, ISO 527-2, ISO 604. This surface protective coating features abrasion resistant, easy to mix and apply, prolongs equipment life, renews worn surfaces, small ceramic bead filled and includes resin and hardener. In addition, it has a working time of 30 minutes and has a tensile strength of 2,550 psi.

Urethane structural adhesives provide a more flexible bond compared to other structural adhesives like epoxy and acrylic. They are best for use in applications that experience impact and vibration.

Urethane structural adhesives provide a more flexible bond compared to other structural adhesives like epoxy and acrylic. They are best for use in applications that experience impact and vibration.

This ez250120 polyurethane adhesive comes in a 0.1 gallon cartridge. It meets the standards for TSCA. In addition, it has a working time of four minutes.

This ez250120 polyurethane adhesive comes in a 0.1 gallon cartridge. It meets the standards for TSCA. In addition, it has a working time of four minutes.

This semi-rigid plastic repair urethane adhesive is black and comes in a dual-cartridge. It meets the standards for OSHA 29 CFR 1910.1200. This urethane adhesive features quick handling strength, urethane chemistry. In addition, it has a working time of 50 seconds.

This semi-rigid plastic repair urethane adhesive is black and comes in a dual-cartridge. It meets the standards for OSHA 29 CFR 1910.1200. This urethane adhesive features quick handling strength, urethane chemistry. In addition, it has a working time of 50 seconds.

This 4247 urethane adhesive is clear and comes in a dual-cartridge. It meets the standards for OSHA 29 CFR 1910.1200. This urethane adhesive features bond created in 60 sec, gap filling. In addition, it has a working time of 20 seconds.

This 4247 urethane adhesive is clear and comes in a dual-cartridge. It meets the standards for OSHA 29 CFR 1910.1200. This urethane adhesive features bond created in 60 sec, gap filling. In addition, it has a working time of 20 seconds.

This Dev-Thane 5 urethane adhesive is grey and comes in a dual-cartridge. It meets the standards for ASTM D1002, ASTM D149, ASTM D1876, ASTM D2240, ASTM D2566, ASTM D412, ASTM D624, ASTM D638. This urethane adhesive features chemical resistant, good mixing, tear resistant and includes resin and hardener. In addition, it has a working time of five minutes and has a tensile strength of 2,100 psi, and is water-resistant.

This Dev-Thane 5 urethane adhesive is grey and comes in a dual-cartridge. It meets the standards for ASTM D1002, ASTM D149, ASTM D1876, ASTM D2240, ASTM D2566, ASTM D412, ASTM D624, ASTM D638. This urethane adhesive features chemical resistant, good mixing, tear resistant and includes resin and hardener. In addition, it has a working time of five minutes and has a tensile strength of 2,100 psi, and is water-resistant.

This urethane-based adhesive begins to harden in 17 hours and is fully cured in 24 hours. Its temperature range is 70 Degrees F to 80 Degrees F. This adhesive meets CEPA, TSCA, OSHA, Section 311/312 - Hazard Categories, EPA Hazardous Air Pollutants (haps) 40cfr63, and California Proposition 65.

This urethane-based adhesive begins to harden in 17 hours and is fully cured in 24 hours. Its temperature range is 70 Degrees F to 80 Degrees F. This adhesive meets CEPA, TSCA, OSHA, Section 311/312 - Hazard Categories, EPA Hazardous Air Pollutants (haps) 40cfr63, and California Proposition 65.

This urethane-based structural adhesive begins to harden in four hours and is fully cured in 24 hours. It has a temperature range of less than 250 Degrees F. This adhesive meets CEPA, TSCA, OSHA, Section 311/312 - hazard categories, Section 313, EPA hazardous air pollutants (HAPS) 40CFR63, and California Proposition 65 standards.

This urethane-based structural adhesive begins to harden in four hours and is fully cured in 24 hours. It has a temperature range of less than 250 Degrees F. This adhesive meets CEPA, TSCA, OSHA, Section 311/312 - hazard categories, Section 313, EPA hazardous air pollutants (HAPS) 40CFR63, and California Proposition 65 standards.

This urethane-based structural adhesive has a temperature range of 70 Degrees F to 80 Degrees F. It begins to harden in 24 hours and is fully cured in 48 hours. The adhesive meets Cepa, Tsca, Osha, Section 311/312 - Hazard Categories, Section 313, Epa Hazardous Air Pollutants (haps) 40cfr63, and California Proposition 65 standards.

This urethane-based structural adhesive has a temperature range of 70 Degrees F to 80 Degrees F. It begins to harden in 24 hours and is fully cured in 48 hours. The adhesive meets Cepa, Tsca, Osha, Section 311/312 - Hazard Categories, Section 313, Epa Hazardous Air Pollutants (haps) 40cfr63, and California Proposition 65 standards.