Threading

This M2 pipe tap is made of high speed steel and has a 0.688 inch diameter, 1¾ inch long shank. It is designed for use with all materials, and meets ANSI standards. This 311-60255 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3⅛ inch length. Plus it has four flutes and a straight shank.

This M2 pipe tap is made of high speed steel and has a 0.688 inch diameter, 1¾ inch long shank. It is designed for use with all materials, and meets ANSI standards. This 311-60255 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3⅛ inch length. Plus it has four flutes and a straight shank.

This tap set is made of high speed steel and has a ¼ inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and meets the standards for Class 2B. This tap set has a bright (uncoated) finish. It has right hand direction with a 2½ inch length.

This tap set is made of high speed steel and has a ¼ inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and meets the standards for Class 2B. This tap set has a bright (uncoated) finish. It has right hand direction with a 2½ inch length.

Maintenance taps are ground thread taps made from high speed steel. For use by hand or for tapping under power. Chamfer-bottoming. (1-2 pitches)

Maintenance taps are ground thread taps made from high speed steel. For use by hand or for tapping under power. Chamfer-bottoming. (1-2 pitches)

This hand tap is made of carbon steel and has a 0.480 inch diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This 312-1282 series hand tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3-13/16 inch length. Plus it has four flutes and a straight shank.

This hand tap is made of carbon steel and has a 0.480 inch diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This 312-1282 series hand tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3-13/16 inch length. Plus it has four flutes and a straight shank.

This SST high performance power tap is 3 11/16 inches long with a 5/16"-18 NC thread. This plug tap has a #F drill size.

This SST high performance power tap is 3 11/16 inches long with a 5/16"-18 NC thread. This plug tap has a #F drill size.

This tap set is made of high speed steel and has a 3/16 inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and meets the standards for Class 2B. This tap set has a bright (uncoated) finish. It has right hand direction with a 2⅜ inch length.

This tap set is made of high speed steel and has a 3/16 inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and meets the standards for Class 2B. This tap set has a bright (uncoated) finish. It has right hand direction with a 2⅜ inch length.

This tap is made of high speed steel and has a 0.194 inch diameter, 1½ inch long shank. It is for use with steel, and meets ANSI standards , Unified and American National Threads, ANSI. This 5305 series tap has a bright (uncoated) finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅜ inch length. Plus it has four flutes and a straight shank.

This tap is made of high speed steel and has a 0.194 inch diameter, 1½ inch long shank. It is for use with steel, and meets ANSI standards , Unified and American National Threads, ANSI. This 5305 series tap has a bright (uncoated) finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅜ inch length. Plus it has four flutes and a straight shank.

This spiral-flute tap is designed for general purpose use and is designed for use with steel. It has a 3⅜ inch length.

This spiral-flute tap is designed for general purpose use and is designed for use with steel. It has a 3⅜ inch length.

This M2 pipe tap is made of high speed steel and has a 0.563 inch diameter, 1⅜ inch long shank. It is designed for use with all materials, and meets ANSI standards. This 311-60155 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2 7/16 inch length. Plus it has four flutes and a straight shank.

This M2 pipe tap is made of high speed steel and has a 0.563 inch diameter, 1⅜ inch long shank. It is designed for use with all materials, and meets ANSI standards. This 311-60155 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2 7/16 inch length. Plus it has four flutes and a straight shank.

This M2 hand tap is made of high speed steel and has a 9.70mm diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This 311-4293 series hand tap has a bright (uncoated) finish, and has metric measurements. It is non-coolant through, has right hand direction with a 74 mm length. Plus it has four flutes and a straight shank.

This M2 hand tap is made of high speed steel and has a 9.70mm diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This 311-4293 series hand tap has a bright (uncoated) finish, and has metric measurements. It is non-coolant through, has right hand direction with a 74 mm length. Plus it has four flutes and a straight shank.

This M2 hand tap is made of high speed steel and has a 0.437 inch diameter, 1⅜ inch long shank. It is designed for use with all materials, and meets ANSI standards. This 311-6011 series hand tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2⅛ inch length. Plus it has four flutes and a straight shank.

This M2 hand tap is made of high speed steel and has a 0.437 inch diameter, 1⅜ inch long shank. It is designed for use with all materials, and meets ANSI standards. This 311-6011 series hand tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2⅛ inch length. Plus it has four flutes and a straight shank.

This M2 hand tap is made of high speed steel and has a 0.318 inch diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This 440-3158 series hand tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2-23/32 inch length. Plus it has four flutes and a straight shank.

This M2 hand tap is made of high speed steel and has a 0.318 inch diameter shank. It is designed for use with all materials, and meets the standards for ANSI. This 440-3158 series hand tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2-23/32 inch length. Plus it has four flutes and a straight shank.

Fractional hand tap set has a high speed steel ground thread. Most versatile tap for hand use or for tapping under power. Popular for use in general machine tapping or CNC tapping. Includes taper, plug and bottoming taps.

Fractional hand tap set has a high speed steel ground thread. Most versatile tap for hand use or for tapping under power. Popular for use in general machine tapping or CNC tapping. Includes taper, plug and bottoming taps.

Combination drill taps, complete hole drilling & tapping in one operation with power drill saves labor & time. Made from high-speed steel vs. carbon steel for longer life. High quality hex shank ensures strong connection to drill chuck.

Combination drill taps, complete hole drilling & tapping in one operation with power drill saves labor & time. Made from high-speed steel vs. carbon steel for longer life. High quality hex shank ensures strong connection to drill chuck.

6 piece metric combination drill taps. Designed to tap up to 10-gauge metal. Quick change adaptor included. 3 mm to 10 mm.

6 piece metric combination drill taps. Designed to tap up to 10-gauge metal. Quick change adaptor included. 3 mm to 10 mm.

High speed steel ground thread taper machine screw hand tap. Versatile taps for hand use or for tapping under power. Popular for use in general machine tapping or CNC tapping. Appropriate for tapping the vast majority of materials.

High speed steel ground thread taper machine screw hand tap. Versatile taps for hand use or for tapping under power. Popular for use in general machine tapping or CNC tapping. Appropriate for tapping the vast majority of materials.