Pavement Markers & Tape

This red/white reflective marking tape is made out of vinyl and measures 3 in width x 15 ft length. The reflective surface on this pavement marking tape makes lanes and road edges more visible in low-light conditions.

This red/white reflective marking tape is made out of vinyl and measures 3 in width x 15 ft length. The reflective surface on this pavement marking tape makes lanes and road edges more visible in low-light conditions.

This yellow pavement marking tape is made out of metallic film with pressure-sensitive adhesive backing and measures 4 in width x 50 yd length. It meets the standards for ASTM-01000-68, Federal Test Method Standard. The reflective surface on this pavement marking tape makes lanes and road edges more visible in low-light conditions.

This yellow pavement marking tape is made out of metallic film with pressure-sensitive adhesive backing and measures 4 in width x 50 yd length. It meets the standards for ASTM-01000-68, Federal Test Method Standard. The reflective surface on this pavement marking tape makes lanes and road edges more visible in low-light conditions.

This amber reflector is made of steel. It measures 2¾ inches x 5 inches. It includes two sides. Pavement markers protrude from the pavement to call attention to lane changes and hazards. Reflective surfaces make the markers visible in low-light and limited-visibility conditions. The markers make a rumble noise when a vehicle crosses over them.

This amber reflector is made of steel. It measures 2¾ inches x 5 inches. It includes two sides. Pavement markers protrude from the pavement to call attention to lane changes and hazards. Reflective surfaces make the markers visible in low-light and limited-visibility conditions. The markers make a rumble noise when a vehicle crosses over them.

This orange reflective marking stake is made out of reinforced polymer and measures 3¾ in width x66 in height. It features chemical-resistance and it will not rot, rust, or corrode. It meets the standards for RoHS 2011/65/EU and 2015/863. Marking stakes push into the ground to designate separate areas and indicate property lines and buried utilities. They're designed for permanent or long-term use.

This orange reflective marking stake is made out of reinforced polymer and measures 3¾ in width x66 in height. It features chemical-resistance and it will not rot, rust, or corrode. It meets the standards for RoHS 2011/65/EU and 2015/863. Marking stakes push into the ground to designate separate areas and indicate property lines and buried utilities. They're designed for permanent or long-term use.

This yellow pavement marker is made of polycarbonate retroreflective polymer. It meets DOT, USDOT, FHWa, CALTRANS, NHTSA standards. It measures ⅝ inches x 4 inches. Pavement markers protrude from the pavement to call attention to lane changes and hazards. Reflective surfaces make the markers visible in low-light and limited-visibility conditions. The markers make a rumble noise when a vehicle crosses over them.

This yellow pavement marker is made of polycarbonate retroreflective polymer. It meets DOT, USDOT, FHWa, CALTRANS, NHTSA standards. It measures ⅝ inches x 4 inches. Pavement markers protrude from the pavement to call attention to lane changes and hazards. Reflective surfaces make the markers visible in low-light and limited-visibility conditions. The markers make a rumble noise when a vehicle crosses over them.

This white blank warning/marking stake is made out of reinforced polymer and measures 3¾ in width x 66 in height. It features chemical-resistance and it will not rot, rust, or corrode. It meets the standards for RoHS 2011/65/EU and 2015/863. Marking stakes push into the ground to designate separate areas and indicate property lines and buried utilities. They're designed for permanent or long-term use.

This white blank warning/marking stake is made out of reinforced polymer and measures 3¾ in width x 66 in height. It features chemical-resistance and it will not rot, rust, or corrode. It meets the standards for RoHS 2011/65/EU and 2015/863. Marking stakes push into the ground to designate separate areas and indicate property lines and buried utilities. They're designed for permanent or long-term use.

This yellow pavement marking tape is made out of metallic film with pressure-sensitive adhesive backing and measures 2 in width x 50 yd length. It meets the standards for ASTM-01000-68, Federal Test Method Standard. The reflective surface on this pavement marking tape makes lanes and road edges more visible in low-light conditions.

This yellow pavement marking tape is made out of metallic film with pressure-sensitive adhesive backing and measures 2 in width x 50 yd length. It meets the standards for ASTM-01000-68, Federal Test Method Standard. The reflective surface on this pavement marking tape makes lanes and road edges more visible in low-light conditions.

This reflective yellow pavement marking tape is made of retroreflective polymer. It meets DOT, USDOT, FHWa, CALTRANS, NHTSA standards. It measures 1/16 inches x 90 feet. The reflective surface on this pavement marking tape makes lanes and road edges more visible in low-light conditions.

This reflective yellow pavement marking tape is made of retroreflective polymer. It meets DOT, USDOT, FHWa, CALTRANS, NHTSA standards. It measures 1/16 inches x 90 feet. The reflective surface on this pavement marking tape makes lanes and road edges more visible in low-light conditions.

This yellow surface mount flexible stake is made out of polycarbonate and measures 8 in width x 8 in length x 48 in height. It includes post, hinge, base, grips, and pin. It meets the standards for FAA. Marking stakes push into the ground to designate separate areas and indicate property lines and buried utilities. They're designed for permanent or long-term use.

This yellow surface mount flexible stake is made out of polycarbonate and measures 8 in width x 8 in length x 48 in height. It includes post, hinge, base, grips, and pin. It meets the standards for FAA. Marking stakes push into the ground to designate separate areas and indicate property lines and buried utilities. They're designed for permanent or long-term use.

This black adhesive pad is made out of ABS plastic and acrylic and measures 4 in width x 4 in length x 3/16 in height. It includes Adhesive pads. Pavement marker adhesives temporarily attach markers to pavement.

This black adhesive pad is made out of ABS plastic and acrylic and measures 4 in width x 4 in length x 3/16 in height. It includes Adhesive pads. Pavement marker adhesives temporarily attach markers to pavement.

This blue pavement marker is made of polycarbonate retroreflective polymer. It meets DOT, USDOT, FHWa, CALTRANS, NHTSA standards. It measures ⅝ inches x 4 inches. Pavement markers protrude from the pavement to call attention to lane changes and hazards. Reflective surfaces make the markers visible in low-light and limited-visibility conditions. The markers make a rumble noise when a vehicle crosses over them.

This blue pavement marker is made of polycarbonate retroreflective polymer. It meets DOT, USDOT, FHWa, CALTRANS, NHTSA standards. It measures ⅝ inches x 4 inches. Pavement markers protrude from the pavement to call attention to lane changes and hazards. Reflective surfaces make the markers visible in low-light and limited-visibility conditions. The markers make a rumble noise when a vehicle crosses over them.

This orange nonreflective marking stake is made out of reinforced polymer and measures 3¾ in width x66 in height. It features chemical-resistance and it will not rot, rust, or corrode. It meets the standards for RoHS 2011/65/EU and 2015/863. Marking stakes push into the ground to designate separate areas and indicate property lines and buried utilities. They're designed for permanent or long-term use.

This orange nonreflective marking stake is made out of reinforced polymer and measures 3¾ in width x66 in height. It features chemical-resistance and it will not rot, rust, or corrode. It meets the standards for RoHS 2011/65/EU and 2015/863. Marking stakes push into the ground to designate separate areas and indicate property lines and buried utilities. They're designed for permanent or long-term use.

This yellow reflective sheeting is made out of polycarbonate and measures 3 in width x 1/16 in length x 6 in height. It includes post, hinge, base, grips, and pin. It meets the standards for FAA. Pavement marker adhesives temporarily attach markers to pavement.

This yellow reflective sheeting is made out of polycarbonate and measures 3 in width x 1/16 in length x 6 in height. It includes post, hinge, base, grips, and pin. It meets the standards for FAA. Pavement marker adhesives temporarily attach markers to pavement.

This white surface mount flexible stake is made out of polycarbonate and measures 8 in width x 8 in length x 36 in height. It includes post, hinge, base, grips, and pin. It meets the standards for FAA. Marking stakes push into the ground to designate separate areas and indicate property lines and buried utilities. They're designed for permanent or long-term use.

This white surface mount flexible stake is made out of polycarbonate and measures 8 in width x 8 in length x 36 in height. It includes post, hinge, base, grips, and pin. It meets the standards for FAA. Marking stakes push into the ground to designate separate areas and indicate property lines and buried utilities. They're designed for permanent or long-term use.

This orange surface mount flexible stake is made out of polycarbonate and measures 8 in width x 8 in length x 48 in height. It includes post, hinge, base, grips, and pin. It meets the standards for FAA. Marking stakes push into the ground to designate separate areas and indicate property lines and buried utilities. They're designed for permanent or long-term use.

This orange surface mount flexible stake is made out of polycarbonate and measures 8 in width x 8 in length x 48 in height. It includes post, hinge, base, grips, and pin. It meets the standards for FAA. Marking stakes push into the ground to designate separate areas and indicate property lines and buried utilities. They're designed for permanent or long-term use.

This white pavement marking tape is made out of metallic film with pressure-sensitive adhesive backing and measures 2 in width x 50 yd length. It meets the standards for ASTM-01000-68, Federal Test Method Standard. The reflective surface on this pavement marking tape makes lanes and road edges more visible in low-light conditions.

This white pavement marking tape is made out of metallic film with pressure-sensitive adhesive backing and measures 2 in width x 50 yd length. It meets the standards for ASTM-01000-68, Federal Test Method Standard. The reflective surface on this pavement marking tape makes lanes and road edges more visible in low-light conditions.