Face Protection

This faceshield visor measure 19 width x 8 3/4 height x 0.06 inches thickness. It is made of polycarbonate and comes in clear. The faceshield meets the CSA Z94.3 standard and features distortion-free optics along with chemical and impact resistance. They are suitable for use with F400/F500 mounting crowns.

This faceshield visor measure 19 width x 8 3/4 height x 0.06 inches thickness. It is made of polycarbonate and comes in clear. The faceshield meets the CSA Z94.3 standard and features distortion-free optics along with chemical and impact resistance. They are suitable for use with F400/F500 mounting crowns.

This faceshield visor measure 16 1/2 width x 8 height x 0.06 inches thickness. It is made of polycarbonate and comes in clear. The faceshield meets the CSA Z94.3 standard and features distortion-free optics along with chemical and impact resistance. They are suitable for use with F400/F500 mounting crowns.

This faceshield visor measure 16 1/2 width x 8 height x 0.06 inches thickness. It is made of polycarbonate and comes in clear. The faceshield meets the CSA Z94.3 standard and features distortion-free optics along with chemical and impact resistance. They are suitable for use with F400/F500 mounting crowns.

This faceshield visor measure 15 1/2 width x 8 height x 0.04 inches thickness. It is made of Polyethylene terephthalate glycol and comes in clear. The universal fit visor is suitable for use with brackets and headgear. It protects from flying debris and chemical splashes.

This faceshield visor measure 15 1/2 width x 8 height x 0.04 inches thickness. It is made of Polyethylene terephthalate glycol and comes in clear. The universal fit visor is suitable for use with brackets and headgear. It protects from flying debris and chemical splashes.

This high performance single crown style faceshield is made of noryl and comes in grey. The faceshield features a model 5000 Speedy Loop mounting system and includes four inches crown. It is suitable for use with E2/P2 series hard hats.

This high performance single crown style faceshield is made of noryl and comes in grey. The faceshield features a model 5000 Speedy Loop mounting system and includes four inches crown. It is suitable for use with E2/P2 series hard hats.

This high-performance faceshield window features a multi-fit attachment pattern that consists of five slots strategically located to fit a wide variety of headgear and brackets. This clear window is made from PETG and measures 15 1/2 x 8 inches with a 0.40-millimetre thickness. Meets CSA Z94.3-7 standards.

This high-performance faceshield window features a multi-fit attachment pattern that consists of five slots strategically located to fit a wide variety of headgear and brackets. This clear window is made from PETG and measures 15 1/2 x 8 inches with a 0.40-millimetre thickness. Meets CSA Z94.3-7 standards.

This faceshield window measures 16 1/2 width x 8 height x 0.06 inches thickness. It is made of polycarbonate and comes in green. The faceshield meets the CSA Z94.3 standard and features cross-usage protection, easy installation, molded propionate, reduced glare, and wide coverage. They are suitable for use with F400/F500 mounting crowns.

This faceshield window measures 16 1/2 width x 8 height x 0.06 inches thickness. It is made of polycarbonate and comes in green. The faceshield meets the CSA Z94.3 standard and features cross-usage protection, easy installation, molded propionate, reduced glare, and wide coverage. They are suitable for use with F400/F500 mounting crowns.

This dielectric faceshield bracket with a Cam Lock system has a universal slot adapter. It is made of nylon and comes in black. The bracket is suitable for use with K2/Matterhorn/Summit/The Peak series hard hats.

This dielectric faceshield bracket with a Cam Lock system has a universal slot adapter. It is made of nylon and comes in black. The bracket is suitable for use with K2/Matterhorn/Summit/The Peak series hard hats.

This faceshield visor measure 15 1/2 width x 8 height x 0.04 inches thickness. It is made of polycarbonate and comes in clear. The universal fit visor is suitable for use with brackets and headgear. It features chemical splash protection, impact protection, and an operating temperature from 250 degrees Fahrenheit to 280 degrees Fahrenheit.

This faceshield visor measure 15 1/2 width x 8 height x 0.04 inches thickness. It is made of polycarbonate and comes in clear. The universal fit visor is suitable for use with brackets and headgear. It features chemical splash protection, impact protection, and an operating temperature from 250 degrees Fahrenheit to 280 degrees Fahrenheit.

This faceshield visor with U5 protection and W5 welding shade designation measure 16 1/2 width x 8 height x 0.06 inches thickness. It is made of polycarbonate and comes in green. The faceshield meets the CSA Z94.3 standard and features distortion-free optics along with chemical and impact resistance. They are suitable for use with F400/F500 mounting crowns.

This faceshield visor with U5 protection and W5 welding shade designation measure 16 1/2 width x 8 height x 0.06 inches thickness. It is made of polycarbonate and comes in green. The faceshield meets the CSA Z94.3 standard and features distortion-free optics along with chemical and impact resistance. They are suitable for use with F400/F500 mounting crowns.

This replacement visor measures 14 1/4 width x 9 1/2 height x 0.04 inches thickness. It is made of polycarbonate and comes in clear. The dielectric visor is suitable for use with Bionic faceshields.

This replacement visor measures 14 1/4 width x 9 1/2 height x 0.04 inches thickness. It is made of polycarbonate and comes in clear. The dielectric visor is suitable for use with Bionic faceshields.

This visor measures 15 width x 8 1/2 height x 5/64 inches thickness. It is made of propionate and comes in clear. The visor meets the CSA Z94.3 standard and is suitable for use with Protecto-Shield faceshields.

This visor measures 15 width x 8 1/2 height x 5/64 inches thickness. It is made of propionate and comes in clear. The visor meets the CSA Z94.3 standard and is suitable for use with Protecto-Shield faceshields.

This AO Tuffmaster molded faceshield visor with UV protection is made of polycarbonate and comes in clear. It measures 14 1/2 height x 9 width x 0.08 inches thickness and is suitable for use with a 3M headgear system.

This AO Tuffmaster molded faceshield visor with UV protection is made of polycarbonate and comes in clear. It measures 14 1/2 height x 9 width x 0.08 inches thickness and is suitable for use with a 3M headgear system.

This forestry molded metal visor is made of steel mesh and comes in matte black. It measures 11 1/2 length x 6 1/2 width x 6 1/2 inches height and is suitable for use with 3M Peltor cap-mounted earmuffs and 3M Peltor hard hat adapter P3EV/2.

This forestry molded metal visor is made of steel mesh and comes in matte black. It measures 11 1/2 length x 6 1/2 width x 6 1/2 inches height and is suitable for use with 3M Peltor cap-mounted earmuffs and 3M Peltor hard hat adapter P3EV/2.

This faceshield window measures 11 1/4 width x 8 height x 0.06 inches thickness. It is made of polycarbonate and comes in clear. The faceshield is suitable for use with F300/F400/F500 mounting crown and has cross-usage protection with standard coverage.

This faceshield window measures 11 1/4 width x 8 height x 0.06 inches thickness. It is made of polycarbonate and comes in clear. The faceshield is suitable for use with F300/F400/F500 mounting crown and has cross-usage protection with standard coverage.

This Bionic full-frame faceshield with ratchet headgear suspension measures 14 1/4 width x 9 1/2 height x 0.04 inches thickness. It has a matte black headgear made of plastic and a clear visor made of polycarbonate. The dielectric faceshield meets the CSA Z94.3 standard and features chemical splash resistance, chin protection, and impact resistance.

This Bionic full-frame faceshield with ratchet headgear suspension measures 14 1/4 width x 9 1/2 height x 0.04 inches thickness. It has a matte black headgear made of plastic and a clear visor made of polycarbonate. The dielectric faceshield meets the CSA Z94.3 standard and features chemical splash resistance, chin protection, and impact resistance.

This high-performance faceshield bracket is for use with regular model hats. This bracket is dielectric and made of plastic.

This high-performance faceshield bracket is for use with regular model hats. This bracket is dielectric and made of plastic.