Drain cleaning power tools remove blockages and clean drains more thoroughly and with less effort than manual drain cleaning tools. Guns and augers clear hair, sludge, and residues from short runs of small-diameter pipe in sink, tub, shower, urinal, and toilet drains. Drum machines unwind cable from their large drum and rotate the cable to break through roots and blockages in floor drains, main sewer lines, and other large-diameter pipe. Sectional machines use segments of cable that store separately from the machine body instead of feeding from an onboard drum, making them more compact to fit into tight spaces and lighter for transport up and down stairs or onto roofs. Auger heads and cutters attach to the cable of a compatible drain cleaning gun, auger, or machine and provide the point of contact to clear blockages. Water jetters spray pressurized water into drain lines to flush out grease, sludge, sand, and other soft blockages.
This all-purpose drain cleaning cable is made of steel and measures 7½ feet length x ⅝ inch diameter. It has a 1¼ to 3 inches line capacity and a ⅝-inch male and female coupling connector. The cable has open wind that provides good flexibility and acts as an auger to remove blockages. It is suitable for use with K-50 and K-60 sectional machines.
This all-purpose drain cleaning cable is made of steel and measures 7½ feet length x ⅝ inch diameter. It has a 1¼ to 3 inches line capacity and a ⅝-inch male and female coupling connector. The cable has open wind that provides good flexibility and acts as an auger to remove blockages. It is suitable for use with K-50 and K-60 sectional machines.
This drop-head auger is made of steel and measures four-inch overall length. It has a minimum drain line with 1½-inch inside diameter. The auger has a ⅜-inch, ½-inch, and ⅝-inch female coupling connections. It is suitable for use with K40/71722/K-39B-1/K39/68057/K-39AF/K-50-8/59000 drain cleaning machines.
This drop-head auger is made of steel and measures four-inch overall length. It has a minimum drain line with 1½-inch inside diameter. The auger has a ⅜-inch, ½-inch, and ⅝-inch female coupling connections. It is suitable for use with K40/71722/K-39B-1/K39/68057/K-39AF/K-50-8/59000 drain cleaning machines.
This hollow core drain cleaning cable is made of steel and measures 7½ feet length x ⅝ inch diameter. It has a 2 to 3 inches line capacity and a ⅝-inch male and female coupling connector. The tight wind of the cable provides good rigidity. It is suitable for use with K-50 and K-60 sectional machines.
This hollow core drain cleaning cable is made of steel and measures 7½ feet length x ⅝ inch diameter. It has a 2 to 3 inches line capacity and a ⅝-inch male and female coupling connector. The tight wind of the cable provides good rigidity. It is suitable for use with K-50 and K-60 sectional machines.
This cordless drain snake kit operates on a 12V Redlithium CP 1.5 battery with a capacity of 1.5 Ah. It has 25 feet cable length, a removable inner drum, and a slide-action cable lock mechanism. The drain snake features a hybrid design and a maximum speed of 500 RPM. It includes five gallon storage bucket and a 5/16 x 25 bulb cable.
This cordless drain snake kit operates on a 12V Redlithium CP 1.5 battery with a capacity of 1.5 Ah. It has 25 feet cable length, a removable inner drum, and a slide-action cable lock mechanism. The drain snake features a hybrid design and a maximum speed of 500 RPM. It includes five gallon storage bucket and a 5/16 x 25 bulb cable.
This M18 Fuel cordless drain snake with Cable-Drive kit operates on an 18V Redlithium CP 2 Ah battery and measures 19½ length x 10 width x 11⅕ inches height. It has a Powerstate brushless motor, a twist-lock cable/feed, and a variable spin speed of 500 RPM. The kit includes an inner core bulb head cable, a multi-voltage charger, and a storage bucket.
This M18 Fuel cordless drain snake with Cable-Drive kit operates on an 18V Redlithium CP 2 Ah battery and measures 19½ length x 10 width x 11⅕ inches height. It has a Powerstate brushless motor, a twist-lock cable/feed, and a variable spin speed of 500 RPM. The kit includes an inner core bulb head cable, a multi-voltage charger, and a storage bucket.
This all-purpose drain cleaning cable is made of steel and measures 15 feet length x ⅞ inch diameter. It has a 2 to 4 inches line capacity and a ⅞-inch male and female coupling connector. The cable has open wind that offers excellent flexibility. It is suitable for use with K-1500, K-1500G, K-1500SP, K-5208, and K-60 sectional machines.
This all-purpose drain cleaning cable is made of steel and measures 15 feet length x ⅞ inch diameter. It has a 2 to 4 inches line capacity and a ⅞-inch male and female coupling connector. The cable has open wind that offers excellent flexibility. It is suitable for use with K-1500, K-1500G, K-1500SP, K-5208, and K-60 sectional machines.
This hollow core drain cleaning cable is made of steel and measures 25 feet length x 5/16 inch diameter. It has a ¾ to 1½ inches line capacity and a 5/16-inch drop connector. The sectional cable includes an auger and provides maximum flexibility for severe bends and P traps. It is suitable for use with drain guns, drum machines, and sink machines.
This hollow core drain cleaning cable is made of steel and measures 25 feet length x 5/16 inch diameter. It has a ¾ to 1½ inches line capacity and a 5/16-inch drop connector. The sectional cable includes an auger and provides maximum flexibility for severe bends and P traps. It is suitable for use with drain guns, drum machines, and sink machines.
This cable pin key is made of steel and has a connection size of ⅝ inch. It has a compatible cable size of ⅜ inch hose diameter. It is for use with the K-50-8/59000 drain cleaning machine.
This cable pin key is made of steel and has a connection size of ⅝ inch. It has a compatible cable size of ⅜ inch hose diameter. It is for use with the K-50-8/59000 drain cleaning machine.
This heavy-duty wind drain cleaning cable is made of steel and measures 7½ feet length x ⅝ inch diameter. It has a 2 to 4 inches line capacity and a ⅝-inch male and female coupling connector. The cable is excellent for long runs in indoor lines. It is suitable for use with K-50 and K-60 sectional machines.
This heavy-duty wind drain cleaning cable is made of steel and measures 7½ feet length x ⅝ inch diameter. It has a 2 to 4 inches line capacity and a ⅝-inch male and female coupling connector. The cable is excellent for long runs in indoor lines. It is suitable for use with K-50 and K-60 sectional machines.
This bulb auger is made of steel and measures 1⅛-inch outside diameter. It has a minimum drain line inside diameter of 1½-inch. The auger has a ⅜-inch, ½-inch, and ⅝-inch female coupling connection. It is suitable for use with K40/71722/K-39B-1/K39/68057/K-39AF/K-50-8/59000 drain cleaning machines.
This bulb auger is made of steel and measures 1⅛-inch outside diameter. It has a minimum drain line inside diameter of 1½-inch. The auger has a ⅜-inch, ½-inch, and ⅝-inch female coupling connection. It is suitable for use with K40/71722/K-39B-1/K39/68057/K-39AF/K-50-8/59000 drain cleaning machines.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.