Cut-Out Tool Router Bits & Accessories

This cut out bit is made of high-speed steel. It is operatable at 33000 RPM. The bit features a right-hand cutting tip, a ¼-inch drill bit/shank diameter, and 1¼-inch cutting depth/flute length. It measures 2½-inch overall length and is suitable for use on drywall.

This cut out bit is made of high-speed steel. It is operatable at 33000 RPM. The bit features a right-hand cutting tip, a ¼-inch drill bit/shank diameter, and 1¼-inch cutting depth/flute length. It measures 2½-inch overall length and is suitable for use on drywall.

This sabrecut drywall bit is made of high-speed steel. It is operatable at 33000 RPM. The bit features a right-hand cutting tip, ⅛-inch drill bit/shank diameter, one-inch cutting depth, and one-inch flute length. It measures two-inch overall length and is suitable for use on aluminum siding/fibreglass/laminates/plywood/plastic/vinyl/wood.

This sabrecut drywall bit is made of high-speed steel. It is operatable at 33000 RPM. The bit features a right-hand cutting tip, ⅛-inch drill bit/shank diameter, one-inch cutting depth, and one-inch flute length. It measures two-inch overall length and is suitable for use on aluminum siding/fibreglass/laminates/plywood/plastic/vinyl/wood.

This spiral saw bit is made of high-speed steel. It is operatable at 33000 RPM. The bit features a right-hand cutting tip, a 5/32-inch drill bit/shank diameter, and a 1¼-inch cutting depth/flute length. It measures 2½-inch overall length and is suitable for use on cement aluminum siding/fibreglass/laminates/plywood/plastic/vinyl/wood.

This spiral saw bit is made of high-speed steel. It is operatable at 33000 RPM. The bit features a right-hand cutting tip, a 5/32-inch drill bit/shank diameter, and a 1¼-inch cutting depth/flute length. It measures 2½-inch overall length and is suitable for use on cement aluminum siding/fibreglass/laminates/plywood/plastic/vinyl/wood.

This sabrecut drywall bit is made of high-speed steel. It is operatable at 33000 RPM. The bit features a right-hand cutting tip, ⅛-inch drill bit/shank diameter, and 1⅛-inch cutting depth/flute length. It measures two-inch overall length and is suitable for use on aluminum siding/fibreglass/laminates/plywood/plastic/vinyl/wood.

This sabrecut drywall bit is made of high-speed steel. It is operatable at 33000 RPM. The bit features a right-hand cutting tip, ⅛-inch drill bit/shank diameter, and 1⅛-inch cutting depth/flute length. It measures two-inch overall length and is suitable for use on aluminum siding/fibreglass/laminates/plywood/plastic/vinyl/wood.

This standard point bit is made of high-speed steel with a maximum speed of 33000 RPM. It has a right-hand cutting tip, a ⅛-inch drill bit/shank diameter, a 2⅜-inch overall length, and one-inch cutting depth/flute length. The point bit is suitable for all Rotozip spiral saws and contains 16 bits in a pack.

This standard point bit is made of high-speed steel with a maximum speed of 33000 RPM. It has a right-hand cutting tip, a ⅛-inch drill bit/shank diameter, a 2⅜-inch overall length, and one-inch cutting depth/flute length. The point bit is suitable for all Rotozip spiral saws and contains 16 bits in a pack.

This cutting bit is made of high-speed steel. It has a maximum speed of 33000 RPM and an overall length of three inches. The bit features a right-hand cutting tip, a ⅛-inch drill bit/shank diameter, and one-inch cutting depth/flute length. It is for use with drywall, plastic, and wood.

This cutting bit is made of high-speed steel. It has a maximum speed of 33000 RPM and an overall length of three inches. The bit features a right-hand cutting tip, a ⅛-inch drill bit/shank diameter, and one-inch cutting depth/flute length. It is for use with drywall, plastic, and wood.

This drywall bit is made of high-speed steel. It is operatable at 33000 RPM. The bit features a right-hand cutting tip, a 5/32-inch drill bit/shank diameter, and a ⅞-inch cutting depth/flute length. It measures 2½-inch overall length and is suitable for use on cement board/ceramic/plaster.

This drywall bit is made of high-speed steel. It is operatable at 33000 RPM. The bit features a right-hand cutting tip, a 5/32-inch drill bit/shank diameter, and a ⅞-inch cutting depth/flute length. It measures 2½-inch overall length and is suitable for use on cement board/ceramic/plaster.

This diamond hole saw features a cutting tip and a ¼-inch shank diameter. It measures two-inch overall length and one-inch cutting depth. The hole saw is for use with porcelain/ceramic/granite.

This diamond hole saw features a cutting tip and a ¼-inch shank diameter. It measures two-inch overall length and one-inch cutting depth. The hole saw is for use with porcelain/ceramic/granite.

This underlayment bit is made of carbide and is operable at 33000 RPM. The bit features a right-hand cutting tip, a 5/32-inch drill bit/shank diameter, a 1¼-inch cutting depth, and 1 13/32-inch flute length. It measures 2½-inch overall length and is suitable for use on cement aluminum siding/fibreglass/laminates/plywood/plastic/vinyl/wood.

This underlayment bit is made of carbide and is operable at 33000 RPM. The bit features a right-hand cutting tip, a 5/32-inch drill bit/shank diameter, a 1¼-inch cutting depth, and 1 13/32-inch flute length. It measures 2½-inch overall length and is suitable for use on cement aluminum siding/fibreglass/laminates/plywood/plastic/vinyl/wood.

This tile-cutting bit is made of tungsten carbide. It is operable at 33000 RPM. The bit features a right-hand cutting tip, a ⅛-inch drill bit/shank diameter, and a ¾-inch cutting depth/flute length. It measures two inches overall length and is for use with cement board/ceramic/plaster.

This tile-cutting bit is made of tungsten carbide. It is operable at 33000 RPM. The bit features a right-hand cutting tip, a ⅛-inch drill bit/shank diameter, and a ¾-inch cutting depth/flute length. It measures two inches overall length and is for use with cement board/ceramic/plaster.

This guidepoint bit is made of high-speed steel. It has a maximum speed of 33000 RPM and an overall length of 2 7/16 inches. The bit features a right-hand cutting tip, a ⅛-inch drill bit/shank diameter, and one-inch cutting depth/flute length. It is for use with Rotozip spiral saws.

This guidepoint bit is made of high-speed steel. It has a maximum speed of 33000 RPM and an overall length of 2 7/16 inches. The bit features a right-hand cutting tip, a ⅛-inch drill bit/shank diameter, and one-inch cutting depth/flute length. It is for use with Rotozip spiral saws.

This tile-cutting bit is made of carbide and is operable at 33000 RPM. The bit features a right-hand cutting tip, a 5/32-inch drill bit/a 3/16-inch shank diameter, and a one-inch cutting depth/flute length. It measures two-inch overall length and is compatible with cement board/ceramic/plaster.

This tile-cutting bit is made of carbide and is operable at 33000 RPM. The bit features a right-hand cutting tip, a 5/32-inch drill bit/a 3/16-inch shank diameter, and a one-inch cutting depth/flute length. It measures two-inch overall length and is compatible with cement board/ceramic/plaster.

This floor tile bit is made of diamond grit. It is operatable at 33000 RPM. The bit features a right-hand cutting tip, a ¼-inch drill bit/shank diameter, and one-inch cutting depth/flute length. It measures 3⅞-inch overall length and is suitable for use on countertops/floor tile.

This floor tile bit is made of diamond grit. It is operatable at 33000 RPM. The bit features a right-hand cutting tip, a ¼-inch drill bit/shank diameter, and one-inch cutting depth/flute length. It measures 3⅞-inch overall length and is suitable for use on countertops/floor tile.

This drywall bit is made of high-speed steel. It is operable at 33000 RPM. The bit features a right-hand cutting tip, a 5/32-inch drill bit/a 3/16-shank diameter, and one-inch cutting depth/flute length. It measures 2½-inch overall length and is for use with all spiral saws. There are 10 bits in a pack.

This drywall bit is made of high-speed steel. It is operable at 33000 RPM. The bit features a right-hand cutting tip, a 5/32-inch drill bit/a 3/16-shank diameter, and one-inch cutting depth/flute length. It measures 2½-inch overall length and is for use with all spiral saws. There are 10 bits in a pack.

This rotary bit is made of steel and has a maximum speed of 33000 RPM. It has a right-hand cutting tip, a 5/32-inch drill bit, a 3/16-shank diameter, 2⅜-inch overall length, and one-inch cutting depth/flute length. The rotary bit is for use with all spiral saws. There are 10 bits in a pack.

This rotary bit is made of steel and has a maximum speed of 33000 RPM. It has a right-hand cutting tip, a 5/32-inch drill bit, a 3/16-shank diameter, 2⅜-inch overall length, and one-inch cutting depth/flute length. The rotary bit is for use with all spiral saws. There are 10 bits in a pack.

This diamond hole saw features a cutting tip and a ¼-inch shank diameter. It measures two-inch overall length and one-inch cutting depth. The hole saw is for use with porcelain/ceramic/granite.

This diamond hole saw features a cutting tip and a ¼-inch shank diameter. It measures two-inch overall length and one-inch cutting depth. The hole saw is for use with porcelain/ceramic/granite.