Specialty Tools

This burr 3 tool includes NG-1 handle, S10, S20 and S35 blades. This tool is 140 millimetres long, with a 40 Degrees angle, and a 3.2-millimetre screw size. This tool is made from high speed steel.

This burr 3 tool includes NG-1 handle, S10, S20 and S35 blades. This tool is 140 millimetres long, with a 40 Degrees angle, and a 3.2-millimetre screw size. This tool is made from high speed steel.

Rapid burr deburring tool will accept all S (E) series blades which are replaced by pulling sleeve back into handle and taking blade out.

Rapid burr deburring tool will accept all S (E) series blades which are replaced by pulling sleeve back into handle and taking blade out.

This double burr deburring tool simultaneously removes burrs from both sides of sheet metal. It ranges from zero to 12 millimetres, with a hand guard for safety. This tool is 200 millimetres long, with a 55 Degrees angle, a DB handle, and an M4 screw size. This tool is made from high speed steel.

This double burr deburring tool simultaneously removes burrs from both sides of sheet metal. It ranges from zero to 12 millimetres, with a hand guard for safety. This tool is 200 millimetres long, with a 55 Degrees angle, a DB handle, and an M4 screw size. This tool is made from high speed steel.

These S-10 blades are for aluminum, plastic, and steel applications. These deburring blades are 47 millimetres long. They are for use with a 40 Degrees angle, and a 3.2-millimetre screw size. They are made from high speed steel and come in a package of 10.

These S-10 blades are for aluminum, plastic, and steel applications. These deburring blades are 47 millimetres long. They are for use with a 40 Degrees angle, and a 3.2-millimetre screw size. They are made from high speed steel and come in a package of 10.

These N-1 blades are for aluminum, plastic, and steel applications. These deburring blades are 25 millimetres long For use with a NG-2 handle, a 40 Degrees angle, and a 2.6-millimetre screw size. They are made from high speed steel and come in a package of 10.

These N-1 blades are for aluminum, plastic, and steel applications. These deburring blades are 25 millimetres long For use with a NG-2 handle, a 40 Degrees angle, and a 2.6-millimetre screw size. They are made from high speed steel and come in a package of 10.

These S-20 blades are for brass and cast iron applications and are suitable for right and left hand users. These deburring blades are 47 millimetres long. They are for use with a NG-1 handle, an 60 Degrees angle, and a 3.2-millimetre screw size. They are made from high speed steel and come in a package of 10.

These S-20 blades are for brass and cast iron applications and are suitable for right and left hand users. These deburring blades are 47 millimetres long. They are for use with a NG-1 handle, an 60 Degrees angle, and a 3.2-millimetre screw size. They are made from high speed steel and come in a package of 10.

This Liza burr deburring tool is Double end blade holder to utilize both N and S blades.Telescopes from: 20-110 mm with N blades20-94 mm with S blades120 millimetres long, with a 40 Degrees angle, a UH handle, and a 3.2-millimetre screw size. Blades are stored inside the handle and the handle has a lifetime guarantee. INCLUDES: UNI handle, SN holder, N1 and N2 blades.

This Liza burr deburring tool is Double end blade holder to utilize both N and S blades.Telescopes from: 20-110 mm with N blades20-94 mm with S blades120 millimetres long, with a 40 Degrees angle, a UH handle, and a 3.2-millimetre screw size. Blades are stored inside the handle and the handle has a lifetime guarantee. INCLUDES: UNI handle, SN holder, N1 and N2 blades.

These S-35 blades are for deburring straight edges. These blades are 47 millimetres long. They are for use with a NG-1 handle, a 55 Degrees angle, and a 3.2-millimetre screw size. They are made from high speed steel and come in a package of 10.

These S-35 blades are for deburring straight edges. These blades are 47 millimetres long. They are for use with a NG-1 handle, a 55 Degrees angle, and a 3.2-millimetre screw size. They are made from high speed steel and come in a package of 10.

These S-150 blades work best on holes with as small of a diameter as 1.5 millimetres. They have an overall length of 45 millimetres. Made for right-hand users, these 45 Degrees angle blades are designed for use with an NG-1 handle and a 3.2-millimetre size screw. They are made from high-speed steel and have an Rc hardness of 62 to 64. There are 10 S-150 blades per package.

These S-150 blades work best on holes with as small of a diameter as 1.5 millimetres. They have an overall length of 45 millimetres. Made for right-hand users, these 45 Degrees angle blades are designed for use with an NG-1 handle and a 3.2-millimetre size screw. They are made from high-speed steel and have an Rc hardness of 62 to 64. There are 10 S-150 blades per package.

Deburring tool blade N80, 0-12 millimeter dimensions, 55 degree angle included.

Deburring tool blade N80, 0-12 millimeter dimensions, 55 degree angle included.

This teddy burr deburring tool includes a N-1 blade and a pocket clip. This tool is 135 millimetres long, with a 40 Degrees angle and a 2.6-millimetre screw size. This tool is made from high speed steel, with an eight-millimetre hexagonal painted aluminum handle. The blades can be replaced by pulling the sleeve back and taking the blade out.

This teddy burr deburring tool includes a N-1 blade and a pocket clip. This tool is 135 millimetres long, with a 40 Degrees angle and a 2.6-millimetre screw size. This tool is made from high speed steel, with an eight-millimetre hexagonal painted aluminum handle. The blades can be replaced by pulling the sleeve back and taking the blade out.

This Super Burr tool includes : NG-3 handle, S holder, S100, S20,S30 blades and a holder that extends from 30 to 115 millimetres. This tool is 170 millimetres long, with a ergonomic NG-3 handle, a 40 Degrees angle, and a 3.2-millimetre screw size. Spare blades are held securely in the back cap. This tool is made from high speed steel.

This Super Burr tool includes : NG-3 handle, S holder, S100, S20,S30 blades and a holder that extends from 30 to 115 millimetres. This tool is 170 millimetres long, with a ergonomic NG-3 handle, a 40 Degrees angle, and a 3.2-millimetre screw size. Spare blades are held securely in the back cap. This tool is made from high speed steel.

This burr 5 tool includes S-10, S-20, S-35, S-101, and S-102 blades. This tool is 140 millimetres long, with a 40 Degrees angle, an NG-1 handle, and a 3.2-millimetre screw size. This tool is made from high speed steel.

This burr 5 tool includes S-10, S-20, S-35, S-101, and S-102 blades. This tool is 140 millimetres long, with a 40 Degrees angle, an NG-1 handle, and a 3.2-millimetre screw size. This tool is made from high speed steel.

These N-10 blades are for plastic and hard metal applications. These deburring blades are 25 millimetres long. They are for use with a NG-2 handle, a 45 Degrees angle, and a 2.6-millimetre screw size. They are made from high speed steel with cobalt and come in a package of 10.

These N-10 blades are for plastic and hard metal applications. These deburring blades are 25 millimetres long. They are for use with a NG-2 handle, a 45 Degrees angle, and a 2.6-millimetre screw size. They are made from high speed steel with cobalt and come in a package of 10.