!
Browser upgrade recommended: Improve your Grainger.ca experience by upgrading your browser to Edge or Chrome. Learn more about our supported browsers.

Filter Results By

Shop By
Brand
Price
Router Bit Flute Type
Primary Material Application
Cutter Dia.
Length of Cut
Overall Length
Shank Dia.
Helix Angle

Solid Router Bits

Solid router bits are used to make plunge and profile cuts in solid surfaces. The geometry of the router bit helps determine the material it's best suited for use with. These router bits are used in CNC routers, machining centres, and milling machines for manufacturing and production applications.

https://catalogue.grainger.ca/2023?hybris=true

105 Results Found

In stock at branch(0)
Results per page :  16 | 32 | 48
  • ONSRUD
  • ROUTING END MILL, SPIRAL UPCUT, SOLID CARBIDE, 2 IN L, 3/16 IN DIA, ¾ IN CUT LENGTH
  • Item # WWG4VZV7
  • Mfr. Model # 52-260
  • EHC: EHC :
  • This 52-200 series spiral upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ¾-inch cut length, ¼-inch shank diameter, 3/16-inch cutter diameter, two-inch overall length, two flutes, and 30 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • ONSRUD
  • ROUTING END MILL, SPIRAL O-FLUTE UPCUT, SOLID CARBIDE, 3 IN L, ⅜ IN DIA, RIGHT-HAND
  • Item # WWG4KPH1
  • Mfr. Model # 65-033
  • EHC: EHC :
  • This 65-000 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures 1⅛-inch cut length, ⅜-inch shank diameter, ⅜-inch cutter diameter, three-inch overall length, and 25 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • ONSRUD
  • ROUTING END MILL, SPIRAL O-FLUTE UPCUT, SOLID CARBIDE, 1½ IN L, 1/16 IN DIA, RIGHT-HAND
  • Item # WWG4KPT2
  • Mfr. Model # 63-602
  • EHC: EHC :
  • This 63-600 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ¼-inch cut length, ⅛-inch shank diameter, 1/16-inch cutter diameter, 1½-inch overall length, and 22 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • ONSRUD
  • ROUTING END MILL, SPIRAL O-FLUTE UPCUT, SOLID CARBIDE, 1½ IN L, ⅛ IN DIA, RIGHT-HAND
  • Item # WWG4KPT3
  • Mfr. Model # 63-604
  • EHC: EHC :
  • This 63-600 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ¼-inch cut length, ⅛-inch shank diameter, ⅛-inch cutter diameter, 1½-inch overall length, and 22 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • ONSRUD
  • ROUTING END MILL, SPIRAL O-FLUTE UPCUT, SOLID CARBIDE, 2 IN LENGTH, ¼ IN CUT LENGTH
  • Item # WWG4KPT4
  • Mfr. Model # 63-606
  • EHC: EHC :
  • This 63-600 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ¼-inch cut length, ¼-inch shank diameter, ⅛-inch cutter diameter, two-inch overall length, and 22 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • ONSRUD
  • ROUTING END MILL, SPIRAL O-FLUTE DOWNCUT, SOLID CARBIDE, 2 IN L, 3/16 IN DIA, RIGHT-HAND
  • Item # WWG4KNV2
  • Mfr. Model # 62-718
  • EHC: EHC :
  • This 62-700 series spiral O-flute downcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ⅝-inch cut length, ¼-inch shank diameter, 3/16-inch cutter diameter, two-inch overall length, and 21 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • ONSRUD
  • ROUTING END MILL, SPIRAL O-FLUTE UPCUT, SOLID CARBIDE, 3 IN L, ⅜ IN DIA, RIGHT-HAND
  • Item # WWG4KNY6
  • Mfr. Model # 63-733
  • EHC: EHC :
  • This spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures 1⅛ inches cut length, ⅜-inch shank diameter, ⅜-inch cutter diameter, three-inch overall length, and 21 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • ONSRUD
  • ROUTING END MILL, SPIRAL UPCUT, SOLID CARBIDE, 2½ IN L, ¼ IN DIA, 2 FLUTES, RIGHT-HAND
  • Item # WWG4KPE3
  • Mfr. Model # 52-554
  • EHC: EHC :
  • This 52-550 series spiral upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures 1⅛-inch cut length, ¼-inch shank diameter, 2½-inch overall length, two flutes, and 25 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • ONSRUD
  • ROUTING END MILL, SPIRAL O-FLUTE DOWNCUT, SOLID CARBIDE, 2 IN L, ½ IN CUT LENGTH
  • Item # WWG4KPF1
  • Mfr. Model # 64-012
  • EHC: EHC :
  • This 64-000 series spiral O-flute downcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ½-inch cut length, ¼-inch shank diameter, ⅛-inch cutter diameter, two-inch overall length, and 25 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • ONSRUD
  • ROUTING END MILL, SPIRAL O-FLUTE UPCUT, SOLID CARBIDE, 2 IN L, ⅛ IN DIA, RIGHT-HAND
  • Item # WWG4KNZ3
  • Mfr. Model # 4KNZ3
  • EHC: EHC :
  • This 63-750 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ½-inch cut length, ¼-inch shank diameter, ⅛-inch cutter diameter, two-inch overall length, and 21 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • ONSRUD
  • ROUTING END MILL, SPIRAL O-FLUTE UPCUT, SOLID CARBIDE, 2 IN L, ¼ IN DIA, RIGHT-HAND
  • Item # WWG4KNW4
  • Mfr. Model # 4KNW4
  • EHC: EHC :
  • This 63-500 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ½-inch cut length, ¼-inch shank diameter, ⅛-inch cutter diameter, two-inch overall length, and 24 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • ONSRUD
  • ROUTING END MILL, SPIRAL O-FLUTE UPCUT, SOLID CARBIDE, 3 IN L, 3/16 IN DIA, RIGHT-HAND
  • Item # WWG4KPG5
  • Mfr. Model # 4KPG5
  • EHC: EHC :
  • This 65-000 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures 1¼-inch cut length, ¼-inch shank diameter, 3/16-inch cutter diameter, three-inch overall length, and 25 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • ONSRUD
  • ROUTING END MILL, SPIRAL O-FLUTE UPCUT, SOLID CARBIDE, 2 IN L, 3/16 IN DIA, RIGHT-HAND
  • Item # WWG4KPT7
  • Mfr. Model # 4KPT7
  • EHC: EHC :
  • This 63-600 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ⅝-inch cut length, ¼-inch shank diameter, 3/16-inch cutter diameter, two-inch overall length, and 22 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • ONSRUD
  • ROUTING END MILL, SPIRAL UPCUT, SOLID CARBIDE, 4 IN L, ¼ IN DIA, 2 FLUTES, RIGHT-HAND
  • Item # WWG4KPE6
  • Mfr. Model # 4KPE6
  • EHC: EHC :
  • This 52-550 series spiral upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures 2¼-inch cut length, ¼-inch shank diameter, four-inch overall length, two flutes, and 25 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • OSG
  • ROUTER BIT, DIAMOND CUT, SOLID CARBIDE, 2½ IN L, ¼ IN DIA, RIGHT-HAND, FOR ROUGHING
  • Item # WWG35DA46
  • Mfr. Model # 640-2513
  • EHC: EHC :
  • This router bit with a diamond cut is made of a solid carbide with a bright finish. It measures a ¼-inch shank diameter, a ½-inch cut length, and 2½-inch overall length. The router bit has a square center-end mill cutting and right-hand cutting direction. It is for use with general-purpose material and end mill roughing/finishing.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • ONSRUD
  • ROUTING END MILL, STRAIGHT SPIRAL O-FLUTE, SOLID CARBIDE, 2 IN L, ⅝ IN CUT LENGTH
  • Item # WWG4KNT9
  • Mfr. Model # 61-062
  • EHC: EHC :
  • This 61-000P series straight spiral O-flute routing end mill is made of high-performance solid carbide with a bright finish. It measures ⅝-inch cut length, 3/16-inch cutter diameter, ¼-inch shank diameter, two-inch overall length, and zero degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Results per page :  16 | 32 | 48

Add to Order List

Your items were added

Your items were added to some lists

Max quantity exceeded. The item could not be added to the following List(s)

No Existing List Found. Please Create New List below.

Your list has been created

Please select a list