Heat shrink and cold shrink tubing are sleeves that form a tight seal around wire, cable, and connectors and are used for protection, insulation, and repairs. Heat shrink tubing requires an oven, hot air gun, or blowtorch to shrink and seal it. All purpose heat shrink tubing can be used across a wide variety of applications. Adhesive-lined heat shrink tubing has an adhesive core that melts when heated to create a moisture-resistant barrier. Heat shrink and cold shrink tubing assortment kits include different sizes or colours of tubing or multiple tubes in the same size. Heat shrink end caps are placed over cable ends, while heat shrink breakout boots are placed over the point where wire splits off from cable. Cold shrink tubing shrinks when an inner core is pulled from one end after the sleeve has been positioned over the bundle. It does not require heat or tools for installation.
This heat shrink tubing is made of polyolefin, and is black. In addition, it meets the standards for RoHS compliant, UL, OEM Approved. It has length of six inches. It is also flame retardant, with a 257 Degrees F maximum temperature.
This heat shrink tubing is made of polyolefin, and is black. In addition, it meets the standards for RoHS compliant, UL, OEM Approved. It has length of six inches. It is also flame retardant, with a 257 Degrees F maximum temperature.
This cold shrink silicon insulator is made of silicone, and is grey. In addition, it meets the standards for ANSI C119.1. It has length of 3.19 inch. 500 Degrees F maximum temperature, and -67 Degrees F minimum temperature.
This cold shrink silicon insulator is made of silicone, and is grey. In addition, it meets the standards for ANSI C119.1. It has length of 3.19 inch. 500 Degrees F maximum temperature, and -67 Degrees F minimum temperature.
Black 3/32 inch diameter by four foot length of thin walled FP-301 poly heat shrink tubing that is mechanically tough, split resistant, resists cold flow, has a two to one shrink ratio and a 900 volt dielectric strength. It is UL recognised and rated for use between minus 55 degrees celsius to 110 degrees celsius.
Black 3/32 inch diameter by four foot length of thin walled FP-301 poly heat shrink tubing that is mechanically tough, split resistant, resists cold flow, has a two to one shrink ratio and a 900 volt dielectric strength. It is UL recognised and rated for use between minus 55 degrees celsius to 110 degrees celsius.
Green 1/4 inch by four feet in length poly heat shrink tubing that is mechanically tough, resists cold flow, has a two to one shrink ratio and a 900 volt dielectric strength. It is UL recognised and rated for use between minus 55 degrees celsius to 110 degrees celsius.
Green 1/4 inch by four feet in length poly heat shrink tubing that is mechanically tough, resists cold flow, has a two to one shrink ratio and a 900 volt dielectric strength. It is UL recognised and rated for use between minus 55 degrees celsius to 110 degrees celsius.
This heat shrink tubing is made of polyolefin, and is black. In addition, it meets the standards for UL 224 600V, 125 Degrees C, CSA, MIL-I-23053/4, and is RoHS compliant. It has length of four feet. It is also flame retardant.
This heat shrink tubing is made of polyolefin, and is black. In addition, it meets the standards for UL 224 600V, 125 Degrees C, CSA, MIL-I-23053/4, and is RoHS compliant. It has length of four feet. It is also flame retardant.
This heat shrink tubing is made of polyolefin, and is black. In addition, it meets the standards for UL 224 600V, 125 Degrees C, CSA, MIL-I-23053/4, and is RoHS compliant. It has length of four feet. It is also flame retardant.
This heat shrink tubing is made of polyolefin, and is black. In addition, it meets the standards for UL 224 600V, 125 Degrees C, CSA, MIL-I-23053/4, and is RoHS compliant. It has length of four feet. It is also flame retardant.
This heat shrink tubing is red. In addition, it meets the standards for ROHS, CSA, and UL. It has length of 50 feet. 200 Degrees F maximum temperature. Heat shrink tubing is used in general purpose industrial and commercial applications. It's flexible to conform to irregular shapes. It covers wire and cable and shrinks with heat to insulate, bundle, colour-code, or provide strain relief.
This heat shrink tubing is red. In addition, it meets the standards for ROHS, CSA, and UL. It has length of 50 feet. 200 Degrees F maximum temperature. Heat shrink tubing is used in general purpose industrial and commercial applications. It's flexible to conform to irregular shapes. It covers wire and cable and shrinks with heat to insulate, bundle, colour-code, or provide strain relief.
This stick of white FP-301 heat shrink tubing that measures 1/16-inch by 48 inches is made of polyolefin that resists cold flow and has a 2:1 shrink ratio and a 900 volt dielectric strength. The tubing is rated for use in temperatures between -55 Degrees C and 110 Degrees C.
This stick of white FP-301 heat shrink tubing that measures 1/16-inch by 48 inches is made of polyolefin that resists cold flow and has a 2:1 shrink ratio and a 900 volt dielectric strength. The tubing is rated for use in temperatures between -55 Degrees C and 110 Degrees C.
This heat shrink tubing is made of cross-linked polyolefin with adhesive, and is black. In addition, it meets the standards for CSA File LR38227, RoHS 2011/65/EU, UL 486D. It has length of four feet. 230 Degrees F maximum temperature, and -67 Degrees F minimum temperature.
This heat shrink tubing is made of cross-linked polyolefin with adhesive, and is black. In addition, it meets the standards for CSA File LR38227, RoHS 2011/65/EU, UL 486D. It has length of four feet. 230 Degrees F maximum temperature, and -67 Degrees F minimum temperature.
This heat shrink tubing is made of polyolefin, and is clear. In addition, it meets the standards for File E-39100, SAE AS23053/5, Class 1 (all colours), Class 2 (clear), CSA certified, and RoHS 2011/65/EU compliant. It has length of four feet. 275 Degrees F maximum temperature, and -67 Degrees F minimum temperature.
This heat shrink tubing is made of polyolefin, and is clear. In addition, it meets the standards for File E-39100, SAE AS23053/5, Class 1 (all colours), Class 2 (clear), CSA certified, and RoHS 2011/65/EU compliant. It has length of four feet. 275 Degrees F maximum temperature, and -67 Degrees F minimum temperature.
This heat shrink tubing is made of cross-linked polyolefin, and is black. In addition, it meets the standards for UL listed, CSA certified and RoHS 2011/65/EU compliant. It has length of six inches. 230 Degrees F maximum temperature, and -67 Degrees F minimum temperature.
This heat shrink tubing is made of cross-linked polyolefin, and is black. In addition, it meets the standards for UL listed, CSA certified and RoHS 2011/65/EU compliant. It has length of six inches. 230 Degrees F maximum temperature, and -67 Degrees F minimum temperature.
This heat shrink tubing is made of polyolefin, and is black. In addition, it meets the standards for UL listed, SAE AS23053/5, Class 1, CSA certified and RoHS 2011/65/EU compliant. It has length of four feet. It is also flame retardant, with a 230 Degrees F maximum temperature, and -67 Degrees F minimum temperature.
This heat shrink tubing is made of polyolefin, and is black. In addition, it meets the standards for UL listed, SAE AS23053/5, Class 1, CSA certified and RoHS 2011/65/EU compliant. It has length of four feet. It is also flame retardant, with a 230 Degrees F maximum temperature, and -67 Degrees F minimum temperature.
This heat shrink tubing is made of polyolefin, and is black. In addition, it meets the standards for Mil Spec 23053/8, and is UL recognized. It has length of 200 feet. It is also flame retardant, with a 275 Degrees F maximum temperature, and -67 Degrees F minimum temperature.
This heat shrink tubing is made of polyolefin, and is black. In addition, it meets the standards for Mil Spec 23053/8, and is UL recognized. It has length of 200 feet. It is also flame retardant, with a 275 Degrees F maximum temperature, and -67 Degrees F minimum temperature.
This six-piece heat shrink tubing is red. In addition, it meets the standards for RoHS compliant, 90 Degrees C (194 Degrees F) continuous. It has length of 1 1/2 inches.
This six-piece heat shrink tubing is red. In addition, it meets the standards for RoHS compliant, 90 Degrees C (194 Degrees F) continuous. It has length of 1 1/2 inches.
Yellow 3/8 inch diameter by four foot length of thin walled poly heat shrink tubing that is mechanically tough, split resistant, resists cold flow, has a two to one shrink ratio and a 900 volt dielectric strength. It is UL recognised and rated for use between minus 55 degrees celsius to 110 degrees celsius.
Yellow 3/8 inch diameter by four foot length of thin walled poly heat shrink tubing that is mechanically tough, split resistant, resists cold flow, has a two to one shrink ratio and a 900 volt dielectric strength. It is UL recognised and rated for use between minus 55 degrees celsius to 110 degrees celsius.
1/8 inch by 500 foot roll of black polyolefin heat shrink tubing that is flame retardant and flexible. The single walled tubing has a low shrink temperature of two to one at 90 degrees celsius and a dielectric strength of 600 volts. It is CSA and UL certified for use up to 125 degrees celsius. Mil-I-23053/3, class 1 and 3.
1/8 inch by 500 foot roll of black polyolefin heat shrink tubing that is flame retardant and flexible. The single walled tubing has a low shrink temperature of two to one at 90 degrees celsius and a dielectric strength of 600 volts. It is CSA and UL certified for use up to 125 degrees celsius. Mil-I-23053/3, class 1 and 3.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.