Caulks, Sealants & Gasket Makers

This roll of white, Petro-Tape sealant is made of pure, virgin polytetrafluoroethylene (PTFE) which is impervious to steam, saltwater, air, refrigerants, fuels, acids and alkalis, and solvents and gases. It is suitable for threaded pipe connections, valve stems, hydraulic pressure lines, and lines carrying fuels, acids and alkalis, solvents and gases. It is 540 inches long, 1/2 inch wide, and 3 mil thick. It has a liquid pressure range of 2,000 PSI and a temperature range of -400 Degrees F to 50

This roll of white, Petro-Tape sealant is made of pure, virgin polytetrafluoroethylene (PTFE) which is impervious to steam, saltwater, air, refrigerants, fuels, acids and alkalis, and solvents and gases. It is suitable for threaded pipe connections, valve stems, hydraulic pressure lines, and lines carrying fuels, acids and alkalis, solvents and gases. It is 540 inches long, 1/2 inch wide, and 3 mil thick. It has a liquid pressure range of 2,000 PSI and a temperature range of -400 Degrees F to 50

This multi-purpose sealant is a one-part, non-sage, silicone paste used for general industrial bonding and sealing. The room temperature vulcanizing sealant cures to a flexible rubber in 24 hours at room temperature and 50 percent humidity. This clear sealant remains stable and flexible from a temperature range of -60 Degrees C to 180 Degrees C. It has a dielectric strength of 548.6 volts per mil. This product comes in a 300-millilitre tube.

This multi-purpose sealant is a one-part, non-sage, silicone paste used for general industrial bonding and sealing. The room temperature vulcanizing sealant cures to a flexible rubber in 24 hours at room temperature and 50 percent humidity. This clear sealant remains stable and flexible from a temperature range of -60 Degrees C to 180 Degrees C. It has a dielectric strength of 548.6 volts per mil. This product comes in a 300-millilitre tube.

This white, PTFE pipe thread tape provides a resistant seal on pipe threads for many applications and withstands steam, salt, water, fuels, air, refrigerants, solvents, acids, and gases. It measures 520 inches in length, 1/2 inch wide, and is 3 mil thick. Its density is 0.36 g/cu cm, sealing temperature is -450 Degrees F to 550 Degrees F, and its maximum liquid pressure is 2,000 PSI.

This white, PTFE pipe thread tape provides a resistant seal on pipe threads for many applications and withstands steam, salt, water, fuels, air, refrigerants, solvents, acids, and gases. It measures 520 inches in length, 1/2 inch wide, and is 3 mil thick. Its density is 0.36 g/cu cm, sealing temperature is -450 Degrees F to 550 Degrees F, and its maximum liquid pressure is 2,000 PSI.

Made of pure, virgin polytetrafluorethylene (PTFE), this roll of Petro-Tape sealant is ideal for use on lines carrying fuels, acids and alkalis, and solvents and gases, and suitable for threaded pipe connections, valve stems, and hydraulic pressure lines. It is white and measures 540 inches long, 3/4 inch wide, and is 3 mil thick. Its temperature range is -400 Degrees F to 500 Degrees F, and the liquid pressure range is 2,000 PSI.

Made of pure, virgin polytetrafluorethylene (PTFE), this roll of Petro-Tape sealant is ideal for use on lines carrying fuels, acids and alkalis, and solvents and gases, and suitable for threaded pipe connections, valve stems, and hydraulic pressure lines. It is white and measures 540 inches long, 3/4 inch wide, and is 3 mil thick. Its temperature range is -400 Degrees F to 500 Degrees F, and the liquid pressure range is 2,000 PSI.

Use this Petro-Tape sealant on threaded pipe connections, valve stems, and hydraulic pressure lines. It is also suitable on lines carrying fuels, acids and alkalis, and solvents and gases. It is white, made of polytetrafluoroethylene (PTFE), and measures 180 inches in length, 1/2 inch wide, and is 3 mil thick. It can withstand a liquid pressure range of 2,000 PSI and a temperature range of -400 Degrees F to 500 Degrees F.

Use this Petro-Tape sealant on threaded pipe connections, valve stems, and hydraulic pressure lines. It is also suitable on lines carrying fuels, acids and alkalis, and solvents and gases. It is white, made of polytetrafluoroethylene (PTFE), and measures 180 inches in length, 1/2 inch wide, and is 3 mil thick. It can withstand a liquid pressure range of 2,000 PSI and a temperature range of -400 Degrees F to 500 Degrees F.

This gasket maker is a single component, room temperature vulcanizing sealant for high-temperature applications and heavy-duty use. The red, non-sag, silicone paste has a continuous operating temperature range of -54 to 316 Degrees C and a flashpoint of greater than 93 Degrees C. This non-flammable, non-toxic sealant begins to harden in one hour and cures fully in 24 hours. This product comes in a 300-millilitre cartridge.

This gasket maker is a single component, room temperature vulcanizing sealant for high-temperature applications and heavy-duty use. The red, non-sag, silicone paste has a continuous operating temperature range of -54 to 316 Degrees C and a flashpoint of greater than 93 Degrees C. This non-flammable, non-toxic sealant begins to harden in one hour and cures fully in 24 hours. This product comes in a 300-millilitre cartridge.

This 567 pipe thread sealant is off-white and comes in a 1.7 fluid ounce tube. It meets the standards for ANSI/NSF Standard 61, UL Listed, and ULC. This pipe thread sealant has a working time of 30 minutes.

This 567 pipe thread sealant is off-white and comes in a 1.7 fluid ounce tube. It meets the standards for ANSI/NSF Standard 61, UL Listed, and ULC. This pipe thread sealant has a working time of 30 minutes.

This 732 silicone sealant comes in a 10 ounce cartridge. It is designed for multi-purpose use and meets the standards for FDA 177.2600, MIL-A-46106, NSF 51, NSF 61, UL Classified. This silicone sealant has a working time of 20 minutes and is nonsagging.

This 732 silicone sealant comes in a 10 ounce cartridge. It is designed for multi-purpose use and meets the standards for FDA 177.2600, MIL-A-46106, NSF 51, NSF 61, UL Classified. This silicone sealant has a working time of 20 minutes and is nonsagging.

This POLY-TEMP thread sealant tape is white in colour. It meets the standards for FDA 21 CFR 177.1550 Part 177, MIL-T-27730A, OSHA GHS, REACH SVHC and RoHS 3.

This POLY-TEMP thread sealant tape is white in colour. It meets the standards for FDA 21 CFR 177.1550 Part 177, MIL-T-27730A, OSHA GHS, REACH SVHC and RoHS 3.

This Petro-Tape thread sealant is white, 540 inches long and one inch wide, and 3 mil thick. It is made of pure, virgin polytetrafluorethylene (PTFE), which is impervious to steam, saltwater, air, refrigerants, fuels, acids and alkalis, and solvents and gases. It is suitable for use on threaded pipe connections, valve stems, hydraulic pressure lines, and lines carrying fuels, acids and alkalis, and solvents and gases. It can withstand up to 2,000 PSI and temperature ranges of -400 Degrees F to

This Petro-Tape thread sealant is white, 540 inches long and one inch wide, and 3 mil thick. It is made of pure, virgin polytetrafluorethylene (PTFE), which is impervious to steam, saltwater, air, refrigerants, fuels, acids and alkalis, and solvents and gases. It is suitable for use on threaded pipe connections, valve stems, hydraulic pressure lines, and lines carrying fuels, acids and alkalis, and solvents and gases. It can withstand up to 2,000 PSI and temperature ranges of -400 Degrees F to

This roll of pink, premium-grade, PTFE pipe thread tape is 260 inches long, 1/2 inch wide, a 4 mil thick for a highly resistant seal on pipe threads for all types of service. It also permits easy disassembly, even after years of use. It is non-toxic with a density of 0.90 g/cu cm, has a sealing temperature of -450 Degrees F to 550 Degrees F, and a maximum liquid pressure of 2,000 PSI.

This roll of pink, premium-grade, PTFE pipe thread tape is 260 inches long, 1/2 inch wide, a 4 mil thick for a highly resistant seal on pipe threads for all types of service. It also permits easy disassembly, even after years of use. It is non-toxic with a density of 0.90 g/cu cm, has a sealing temperature of -450 Degrees F to 550 Degrees F, and a maximum liquid pressure of 2,000 PSI.

DAP Silicone Sealant Rubber Sealant is an all-purpose, one component, acetoxy cure sealant ideal for indoor/outdoor use. It provides a watertight, flexible seal that won't crack, crumble or shrink. Once cured, it is unaffected by temperature extremes -40

DAP Silicone Sealant Rubber Sealant is an all-purpose, one component, acetoxy cure sealant ideal for indoor/outdoor use. It provides a watertight, flexible seal that won't crack, crumble or shrink. Once cured, it is unaffected by temperature extremes -40

Mildew resistant sealant, 786 is a single component silicone rubber sealant primarily used for interior sealing applications exposed to high moisture. Mildew resistant permanently flexible, resists moisture and steam.

Mildew resistant sealant, 786 is a single component silicone rubber sealant primarily used for interior sealing applications exposed to high moisture. Mildew resistant permanently flexible, resists moisture and steam.

This multi-purpose sealant is a one-component, non-sag, silicone paste used for general industrial bonding and sealing. The room temperature vulcanizing sealant cures to a flexible rubber in 24 hours at room temperature and 50 percent humidity. This clear sealant remains stable and flexible from a temperature range of -60 to 180 Degrees ​C. It has a dielectric strength of 548.6 volts per mil. This product comes in a 90 millilitre tube.

This multi-purpose sealant is a one-component, non-sag, silicone paste used for general industrial bonding and sealing. The room temperature vulcanizing sealant cures to a flexible rubber in 24 hours at room temperature and 50 percent humidity. This clear sealant remains stable and flexible from a temperature range of -60 to 180 Degrees ​C. It has a dielectric strength of 548.6 volts per mil. This product comes in a 90 millilitre tube.

This 737 silicone sealant comes in a 10 ounce cartridge. It is designed for use on hvac, duct and electrical and meets the standards for UL 94 HB. This silicone sealant has a working time of 14 minutes.

This 737 silicone sealant comes in a 10 ounce cartridge. It is designed for use on hvac, duct and electrical and meets the standards for UL 94 HB. This silicone sealant has a working time of 14 minutes.

This pipetite-stik pipe thread sealant is white and comes in a 1.three ounce stick. It meets the standards for NSF, UL Listed, and UPC.

This pipetite-stik pipe thread sealant is white and comes in a 1.three ounce stick. It meets the standards for NSF, UL Listed, and UPC.