Nonelectrical Properties Testing

Microwave Leakage Detector, 0 - 9.99 mW/cm2, Accuracy +/-1mW/cm2, Detects Very Low Levels of Microwave Leakage, Audible and Visual Alarm Signals, Built-in Memory, Monitors Audible (Beep) and Visual (Flashing Red Light Alarms Signals), 5-Digit LCD with Backlight Display, Includes Soft Carrying Case and Batteries

Microwave Leakage Detector, 0 - 9.99 mW/cm2, Accuracy +/-1mW/cm2, Detects Very Low Levels of Microwave Leakage, Audible and Visual Alarm Signals, Built-in Memory, Monitors Audible (Beep) and Visual (Flashing Red Light Alarms Signals), 5-Digit LCD with Backlight Display, Includes Soft Carrying Case and Batteries

This sound level meter comes with a calibration certificate, windscreen, four AAA batteries, USB cable, software, and carry case. Its range is 30 to 130 dB with 0.1 dB resolution, and accuracy of +/- 1.4 dB. Its frequency range is 20Hz to 8kHz and frequency weighting is A or C. It has a 1/2-inch electret condenser microphone, LCD display, and can hold up to 64,000 recordings. Operational in temperatures between 0 Degrees C and 40 Degrees C.

This sound level meter comes with a calibration certificate, windscreen, four AAA batteries, USB cable, software, and carry case. Its range is 30 to 130 dB with 0.1 dB resolution, and accuracy of +/- 1.4 dB. Its frequency range is 20Hz to 8kHz and frequency weighting is A or C. It has a 1/2-inch electret condenser microphone, LCD display, and can hold up to 64,000 recordings. Operational in temperatures between 0 Degrees C and 40 Degrees C.

This digital sound level meter comes with a windscreen, three AAA batteries, USB cable, software, case, and a calibrator. Its range is 30 to 130 dB with 0.1 dB resolution, and accuracy of +/- 1.4 dB. Its frequency range is 20Hz to 8kHz and frequency weighting is A and C. It has a 1/2-inch electret condenser microphone, LCD display, and records up to 32,000 readings. Includes a one-year manufacturer's warranty.

This digital sound level meter comes with a windscreen, three AAA batteries, USB cable, software, case, and a calibrator. Its range is 30 to 130 dB with 0.1 dB resolution, and accuracy of +/- 1.4 dB. Its frequency range is 20Hz to 8kHz and frequency weighting is A and C. It has a 1/2-inch electret condenser microphone, LCD display, and records up to 32,000 readings. Includes a one-year manufacturer's warranty.

This sound level meter comes with a calibration certificate, 9-volt battery, windscreen, and carry case. Its range is 30 to 130 dB with an accuracy of +/- 1.4 dB, and a 0.1 dB resolution. Its frequency range is 31.5Hz to 8kHz and frequency weighting is A or C. It has a 1/2-inch electret condenser microphone and an LCD display. It operates in temperatures between 0 Degrees C and 40 Degrees C.

This sound level meter comes with a calibration certificate, 9-volt battery, windscreen, and carry case. Its range is 30 to 130 dB with an accuracy of +/- 1.4 dB, and a 0.1 dB resolution. Its frequency range is 31.5Hz to 8kHz and frequency weighting is A or C. It has a 1/2-inch electret condenser microphone and an LCD display. It operates in temperatures between 0 Degrees C and 40 Degrees C.

Tachometer, Contact, Non-Contact, Contact RPM Range 5 - 19,999, Noncontact RPM Range 2 - 99,999, Speed (M/Min) 0.05 - 1,999.9, RPM Accuracy 0.05 Percent of Reading +1 Digit, Speed Accuracy +/-0.05 Percent +1 Digit, RPM Resolution 0.100, Light Source Laser, Display 5 Digital, 18mm (0.7 In. LCD), Memory Last/Min/Max

Tachometer, Contact, Non-Contact, Contact RPM Range 5 - 19,999, Noncontact RPM Range 2 - 99,999, Speed (M/Min) 0.05 - 1,999.9, RPM Accuracy 0.05 Percent of Reading +1 Digit, Speed Accuracy +/-0.05 Percent +1 Digit, RPM Resolution 0.100, Light Source Laser, Display 5 Digital, 18mm (0.7 In. LCD), Memory Last/Min/Max

This coating thickness gauge kit includes a coating thickness gauge, ferrous probe, non-ferrous probe, calibration standards, AA battery, and a hard carrying case. The probes are three feet in length each. The gauge has a measuring range from zero to 40 mils (zero to 1000 micrometres). It is accurate to within one micrometre for measurements under 100 micrometres and within 3 percent for measurements over 100 micrometres. A calibration certificate and a one year warranty are included.

This coating thickness gauge kit includes a coating thickness gauge, ferrous probe, non-ferrous probe, calibration standards, AA battery, and a hard carrying case. The probes are three feet in length each. The gauge has a measuring range from zero to 40 mils (zero to 1000 micrometres). It is accurate to within one micrometre for measurements under 100 micrometres and within 3 percent for measurements over 100 micrometres. A calibration certificate and a one year warranty are included.

This R7950 ultrasonic couplant gel comes in a 250-millilitre bottle. It is made for use with ultrasonic thickness gauges and is ideal for iron, steel, aluminum, and titanium surfaces.

This R7950 ultrasonic couplant gel comes in a 250-millilitre bottle. It is made for use with ultrasonic thickness gauges and is ideal for iron, steel, aluminum, and titanium surfaces.

This light meter features white/red/yellow/green/blue/purple LED and standard lighting types. It has a 0-199,900 lux measuring range, a +/-3% accuracy, a six-digit LCD display, and a silicon photodiode and colour correction filter. This light meter includes a detachable sensor, sensor cover, hard carrying case, three-foot cord, and AA batteries.

This light meter features white/red/yellow/green/blue/purple LED and standard lighting types. It has a 0-199,900 lux measuring range, a +/-3% accuracy, a six-digit LCD display, and a silicon photodiode and colour correction filter. This light meter includes a detachable sensor, sensor cover, hard carrying case, three-foot cord, and AA batteries.