Machine & Tool Maintenance

This straight-type screw extractor is for removing screws, bolts, and studs, size 7/16 inches. It is a #3 extractor, made from carbide, and is for a drill sized at 15/64 inches.

This straight-type screw extractor is for removing screws, bolts, and studs, size 7/16 inches. It is a #3 extractor, made from carbide, and is for a drill sized at 15/64 inches.

Screw Extractor, Spiral Flute, For Removing Studs, Bolts, Screws 1-3/8 In. to 1-3/4 In., For Removing Pipe 3/4 In., Size #8, Drill Size (In.) 13/16, Overall Length (In.) 4-1/8, Taper Length (In.) 2-1/4, Small End Dia. (In.) 3/4, Large End Dia. (In.) 1-1/32, Carbon Steel, Removing Broken Screws, Bolts and Other Threaded Parts

Screw Extractor, Spiral Flute, For Removing Studs, Bolts, Screws 1-3/8 In. to 1-3/4 In., For Removing Pipe 3/4 In., Size #8, Drill Size (In.) 13/16, Overall Length (In.) 4-1/8, Taper Length (In.) 2-1/4, Small End Dia. (In.) 3/4, Large End Dia. (In.) 1-1/32, Carbon Steel, Removing Broken Screws, Bolts and Other Threaded Parts

This tool wrap is made of 321 stainless steel and is 50 feet in length.

This tool wrap is made of 321 stainless steel and is 50 feet in length.

This screw extractor set is made of carbon steel. It includes six 150 drills 5/64 inch, 7/64 inch, 5/32 inch, ¼ inch, 17/64 inch, 13/32 inch, six extractors #1, #2, #3, #4, #5, #6 inch pouch inch tube. Plus it has a two-inch, 2¾ inch, 2⅜ inch, 3 inch, 3¾ inch, 3⅜ inch length.

This screw extractor set is made of carbon steel. It includes six 150 drills 5/64 inch, 7/64 inch, 5/32 inch, ¼ inch, 17/64 inch, 13/32 inch, six extractors #1, #2, #3, #4, #5, #6 inch pouch inch tube. Plus it has a two-inch, 2¾ inch, 2⅜ inch, 3 inch, 3¾ inch, 3⅜ inch length.

Use this #2 screw extractor with a 7/64 inch drill for screws sized 1/4 inch to 5/16 inch.

Use this #2 screw extractor with a 7/64 inch drill for screws sized 1/4 inch to 5/16 inch.

This seven-piece extractor set has straight, tapered extractors for screws, studs, and bolt sizes 1 1/4-inch, 2 3/8-inch, 3 7/16-inch, 4 1/2-inch, 5 5/8-inch, 6 3/4-inch, and 7 7/8 inch. This set comes with a vinyl storage pouch.

This seven-piece extractor set has straight, tapered extractors for screws, studs, and bolt sizes 1 1/4-inch, 2 3/8-inch, 3 7/16-inch, 4 1/2-inch, 5 5/8-inch, 6 3/4-inch, and 7 7/8 inch. This set comes with a vinyl storage pouch.

This HSS screw extractor is a #5 size for use with a 9/32 inch drill. It extracts machine screws from 9/16 inches in size to 3/4 inches. This extractor has a TiCN coating for enhanced abrasive wear resistance.

This HSS screw extractor is a #5 size for use with a 9/32 inch drill. It extracts machine screws from 9/16 inches in size to 3/4 inches. This extractor has a TiCN coating for enhanced abrasive wear resistance.

Screw Extractor, Spiral Flute, For Removing Studs, Bolts, Screws 1-1/8 In. to 1-1/2 In., Size #7, Drive Size (In.) 1/2, Drill Size (In.) 17/32, Overall Length (In.) 4-1/8, Taper Length (In.) 2-1/4, Small End Dia. (In.) 19/32, Large End Dia. (In.) 7/8, Carbon Steel, Removing Broken Screws, Bolts and Other Threaded Parts

Screw Extractor, Spiral Flute, For Removing Studs, Bolts, Screws 1-1/8 In. to 1-1/2 In., Size #7, Drive Size (In.) 1/2, Drill Size (In.) 17/32, Overall Length (In.) 4-1/8, Taper Length (In.) 2-1/4, Small End Dia. (In.) 19/32, Large End Dia. (In.) 7/8, Carbon Steel, Removing Broken Screws, Bolts and Other Threaded Parts

This stud remover is two inches long and has a drive size of 1/2 inch. It can remove headless bolts between 1/4 and 3/4 inches in size.

This stud remover is two inches long and has a drive size of 1/2 inch. It can remove headless bolts between 1/4 and 3/4 inches in size.

Screw Extractor, Spiral Flute, For Removing Studs, Bolts, Screws 1 In. to 1-3/8 In., For Removing Pipe 1/2 In., Size #7, Drill Size (In.) 17/32, Overall Length (In.) 4-1/8, Taper Length (In.) 2-1/4, Small End Dia. (In.) 1/2, Large End Dia. (In.) 25/32, Carbon Steel, Removing Broken Screws, Bolts and Other Threaded Parts

Screw Extractor, Spiral Flute, For Removing Studs, Bolts, Screws 1 In. to 1-3/8 In., For Removing Pipe 1/2 In., Size #7, Drill Size (In.) 17/32, Overall Length (In.) 4-1/8, Taper Length (In.) 2-1/4, Small End Dia. (In.) 1/2, Large End Dia. (In.) 25/32, Carbon Steel, Removing Broken Screws, Bolts and Other Threaded Parts

Replacement parts and accessories for oil skimmers allow machine operators or maintenance staff replace broken or worn skimmer parts or extend the use of oil skimmers.

Replacement parts and accessories for oil skimmers allow machine operators or maintenance staff replace broken or worn skimmer parts or extend the use of oil skimmers.

Removes damaged, rounded over, painted over and rusted nuts and bolts. Can be used on both metric and imperial sized nuts. Can be used with a 3/8 inch socket drive, a open ended wrench, Vise Grip or impact gun. Bolt sizes: 5/16 inch, 11/16 inch, 3/4 inch.

Removes damaged, rounded over, painted over and rusted nuts and bolts. Can be used on both metric and imperial sized nuts. Can be used with a 3/8 inch socket drive, a open ended wrench, Vise Grip or impact gun. Bolt sizes: 5/16 inch, 11/16 inch, 3/4 inch.

This is a #6, straight-style screw extractor. It is made from carbide and fits a 15/32-inch drill. This tool extracts screws, studs, and bolts sized 3/4 inches.

This is a #6, straight-style screw extractor. It is made from carbide and fits a 15/32-inch drill. This tool extracts screws, studs, and bolts sized 3/4 inches.

Ezy-Out screw extractor used for removing broken screws. List No. 192. Extractor #5. Screw diameter 9/16 to 3/4 inch. Drill size 9/32 inch.

Ezy-Out screw extractor used for removing broken screws. List No. 192. Extractor #5. Screw diameter 9/16 to 3/4 inch. Drill size 9/32 inch.

Power-grip screw and bolt extractor. 3/16 inch, 1/4 inch, 5/16 inch, 3/8 inch, 10 mm, 7/16 inch, 1/2 inch. 1/4 inch Hex shank fits most cordless drills, impact drivers, corded drills and nut runners. Power groove works with quick change adapointer. Grips both st

Power-grip screw and bolt extractor. 3/16 inch, 1/4 inch, 5/16 inch, 3/8 inch, 10 mm, 7/16 inch, 1/2 inch. 1/4 inch Hex shank fits most cordless drills, impact drivers, corded drills and nut runners. Power groove works with quick change adapointer. Grips both st

These drivers and wrenches tighten and loosen fasteners that secure inserts and other components of indexable cutting tools. They are commonly used when rotating (indexing) inserts to expose a new cutting edge, replacing worn inserts, or changing to different inserts.

These drivers and wrenches tighten and loosen fasteners that secure inserts and other components of indexable cutting tools. They are commonly used when rotating (indexing) inserts to expose a new cutting edge, replacing worn inserts, or changing to different inserts.