Face Protection

This faceshield storage bag measure 16 width x 18 1/2 height x 10 inches thickness. It is made of cotton and comes in white. The storage bag includes a drawstring closure and is suitable for use with an arc flash faceshield.

This faceshield storage bag measure 16 width x 18 1/2 height x 10 inches thickness. It is made of cotton and comes in white. The storage bag includes a drawstring closure and is suitable for use with an arc flash faceshield.

This molded faceshield measures 8 1/4 width x 12 1/8 height x 0.04 inches thickness. It is made of anti-glare polycarbonate and comes in green. The brimless lightweight high impact faceshield provides ventilation with heat resistance of 266 degrees Celsius and is suitable for use with 3M Peltor cap-mounted earmuffs and hard hat adapter P3EV/2.

This molded faceshield measures 8 1/4 width x 12 1/8 height x 0.04 inches thickness. It is made of anti-glare polycarbonate and comes in green. The brimless lightweight high impact faceshield provides ventilation with heat resistance of 266 degrees Celsius and is suitable for use with 3M Peltor cap-mounted earmuffs and hard hat adapter P3EV/2.

This high heat flat impact visor measures 15 width x 8 height x 0.04 inches thickness. It is made of polycarbonate and comes in clear. The dielectric visor is suitable for use with the Sentinel series.

This high heat flat impact visor measures 15 width x 8 height x 0.04 inches thickness. It is made of polycarbonate and comes in clear. The dielectric visor is suitable for use with the Sentinel series.

This full frame faceshield with ratchet headgear suspension measures 13 1/2 width x 9 height x 0.04 inches thickness. It has black headgear made of nylon and a clear visor made of polycarbonate. The faceshield uses to protect against flying debris and meets the CSA Z94.3-2015 standard.

This full frame faceshield with ratchet headgear suspension measures 13 1/2 width x 9 height x 0.04 inches thickness. It has black headgear made of nylon and a clear visor made of polycarbonate. The faceshield uses to protect against flying debris and meets the CSA Z94.3-2015 standard.

This single crown headgear with ratchet suspension has a browguard. It is made of plastic and comes in grey. The headgear is suitable for use with a faceshield visor and includes a sweatband.

This single crown headgear with ratchet suspension has a browguard. It is made of plastic and comes in grey. The headgear is suitable for use with a faceshield visor and includes a sweatband.

This Fibre-Metal measures 16 1/2 width x 8 height x 0.065 inches thickness and is designed to be used with F400/F500 mounting crown. It is made of propionate and comes in shade 3.0. The visor with W3 welding shade and U3 protection meets the CSA Z94.3 standard. It is compatible with F400/F500/FH66/FM70/FM71 models.

This Fibre-Metal measures 16 1/2 width x 8 height x 0.065 inches thickness and is designed to be used with F400/F500 mounting crown. It is made of propionate and comes in shade 3.0. The visor with W3 welding shade and U3 protection meets the CSA Z94.3 standard. It is compatible with F400/F500/FH66/FM70/FM71 models.

This V-Gard faceshield visor measures 17 width x 8 height x 0.065 inches thickness. It is made of Epoxy-coated steel mesh and comes in grey. The general purpose dielectric anti-fog, anti-scratch visor has black plastic-edged mesh.

This V-Gard faceshield visor measures 17 width x 8 height x 0.065 inches thickness. It is made of Epoxy-coated steel mesh and comes in grey. The general purpose dielectric anti-fog, anti-scratch visor has black plastic-edged mesh.

This V-Gard accessory system kit includes a polycarbonate faceshield bracket and visor. The anti-fog, anti-scratch clear visor measures 9 1/2 width x 17 height x 1/25 inches thickness. It has full crown headgear and comes in black. They feature an elastic band, slip union connectors on both inlets, and discharge ports.

This V-Gard accessory system kit includes a polycarbonate faceshield bracket and visor. The anti-fog, anti-scratch clear visor measures 9 1/2 width x 17 height x 1/25 inches thickness. It has full crown headgear and comes in black. They feature an elastic band, slip union connectors on both inlets, and discharge ports.

This faceshield visor measures 16 width x 9 height x 0.05 inches thickness. It is made of polycarbonate and comes in clear. The faceshield has a larger viewing area for increased protection and is suitable for use with all Maxview models.

This faceshield visor measures 16 width x 9 height x 0.05 inches thickness. It is made of polycarbonate and comes in clear. The faceshield has a larger viewing area for increased protection and is suitable for use with all Maxview models.

This multi-fit molded safety visor measures 20 width x 9 1/2 height x 0.06 inches thickness. It is made of polycarbonate and comes in clear. The high performance visor is suitable for use with headgear and hard hats.

This multi-fit molded safety visor measures 20 width x 9 1/2 height x 0.06 inches thickness. It is made of polycarbonate and comes in clear. The high performance visor is suitable for use with headgear and hard hats.

This replacement visor with W3 welding shade measures 14 1/4 width x 9 1/2 height x 0.06 inches thickness. It is made of polycarbonate and comes in shade 5.0 that meet the CSA Z94.3 standard. The dielectric visor is suitable for use with Bionic faceshields.

This replacement visor with W3 welding shade measures 14 1/4 width x 9 1/2 height x 0.06 inches thickness. It is made of polycarbonate and comes in shade 5.0 that meet the CSA Z94.3 standard. The dielectric visor is suitable for use with Bionic faceshields.

This flat high heat impact visor measures 19 3/4 width x 9 height x 0.06 inches thickness. It is made of polycarbonate and comes in clear. The visor is suitable for use with Bullard headgear or faceshield brackets.

This flat high heat impact visor measures 19 3/4 width x 9 height x 0.06 inches thickness. It is made of polycarbonate and comes in clear. The visor is suitable for use with Bullard headgear or faceshield brackets.

This replacement visor measures 15 7/8 width x 9 height x 0.09 inches thickness. It is made of polycarbonate and comes in clear with hardcoat anti-fog coating. The dielectric visor meets the CSA Z94.3 standard and is suitable for use with Turboshield headgear and a hard hat adapter.

This replacement visor measures 15 7/8 width x 9 height x 0.09 inches thickness. It is made of polycarbonate and comes in clear with hardcoat anti-fog coating. The dielectric visor meets the CSA Z94.3 standard and is suitable for use with Turboshield headgear and a hard hat adapter.

This faceshield bracket is used for hard hats and faceshields. This bracket is silver in colour and made of rubber and aluminum.

This faceshield bracket is used for hard hats and faceshields. This bracket is silver in colour and made of rubber and aluminum.

This flat visor measures 15 width x 7 height x 0.04 inches thickness. It is made of acetate and comes in clear. The dielectric visor is suitable for use with CP1 and CP2 Sentinel series.

This flat visor measures 15 width x 7 height x 0.04 inches thickness. It is made of acetate and comes in clear. The dielectric visor is suitable for use with CP1 and CP2 Sentinel series.