Get all your cabinet and drawer hardware at Grainger Canada. With a wide selection of hardware like catches, latches, knobs, pulls and slides, you will find everything that you need for your cabinet project or repair. You'll also find a range of full extension drawer slides in a variety of sizes and capacities. No matter what your needs, from traditional to modern styling, Grainger has the hardware you need.
This straight tubular-grip pull handle with a centre-to-centre tapped mounting hole is made of aluminum and die-cast zinc with a natural anodized finish. It measures 16.30 x 2.60 inches. It has a 1 7/64 grip diameter x 1 7/64 inch grip thickness. The mounting hole measures 15.75 inches x 0.59-inch thread depth. This handle has a screw size of M8 x 1.25 inches, is silver in colour, and has a load capacity of 382 pounds.
This straight tubular-grip pull handle with a centre-to-centre tapped mounting hole is made of aluminum and die-cast zinc with a natural anodized finish. It measures 16.30 x 2.60 inches. It has a 1 7/64 grip diameter x 1 7/64 inch grip thickness. The mounting hole measures 15.75 inches x 0.59-inch thread depth. This handle has a screw size of M8 x 1.25 inches, is silver in colour, and has a load capacity of 382 pounds.
This straight tubular-grip pull handle with a centre-to-centre tapped mounting hole is made of aluminum and die-cast zinc with a powder-coated finish. It measures 7.87 x 2.60 inches. It has a 1 7/64 grip diameter x 1 7/64 inch grip thickness. The mounting hole measures 7.87 inches x 0.59-inch thread depth. This handle has a screw size of M8 x 1.25 inches, is black in colour, and has a load capacity of 786 pounds.
This straight tubular-grip pull handle with a centre-to-centre tapped mounting hole is made of aluminum and die-cast zinc with a powder-coated finish. It measures 7.87 x 2.60 inches. It has a 1 7/64 grip diameter x 1 7/64 inch grip thickness. The mounting hole measures 7.87 inches x 0.59-inch thread depth. This handle has a screw size of M8 x 1.25 inches, is black in colour, and has a load capacity of 786 pounds.
This 45 Degrees off-set tubular-grip pull handle with a centre-to-centre through mounting hole is made of aluminum and die-cast zinc with a natural anodized finish. It measures 20.24 x 2.60 inches. It has a 1 7/64 grip diameter x 1 7/64 inch grip thickness. The mounting hole measures 19.69 inches x 0.59-inch thread depth. This handle has a screw size of M8 x 1.25 inches, is silver in colour, and has a load capacity of 505 pounds.
This 45 Degrees off-set tubular-grip pull handle with a centre-to-centre through mounting hole is made of aluminum and die-cast zinc with a natural anodized finish. It measures 20.24 x 2.60 inches. It has a 1 7/64 grip diameter x 1 7/64 inch grip thickness. The mounting hole measures 19.69 inches x 0.59-inch thread depth. This handle has a screw size of M8 x 1.25 inches, is silver in colour, and has a load capacity of 505 pounds.
This straight tubular-grip pull handle with a centre-to-centre tapped mounting hole is made of aluminum and die-cast zinc with a natural anodized finish. It measures 12.55 x 2.60 inches. It has a 1 7/64 grip diameter x 1 7/64 inch grip thickness. The mounting hole measures 12 inches x 0.59-inch thread depth. This handle has a screw size of 5/16"-18, is silver in colour, and has a load capacity of 629 pounds.
This straight tubular-grip pull handle with a centre-to-centre tapped mounting hole is made of aluminum and die-cast zinc with a natural anodized finish. It measures 12.55 x 2.60 inches. It has a 1 7/64 grip diameter x 1 7/64 inch grip thickness. The mounting hole measures 12 inches x 0.59-inch thread depth. This handle has a screw size of 5/16"-18, is silver in colour, and has a load capacity of 629 pounds.
This arched pull handle with a centre-to-centre tapped mounting hole is made of aluminum with a bright-tumbled finish. It measures 8.94 x 2.24 inches. It has a 1 1/64 grip diameter x 43/64 inch grip thickness. The mounting hole measures 7.56 inches x 0.43-inch thread depth. This handle has a screw size of M8 x 1.25-inch, is silver in colour, and has a load capacity of 1,100 pounds.
This arched pull handle with a centre-to-centre tapped mounting hole is made of aluminum with a bright-tumbled finish. It measures 8.94 x 2.24 inches. It has a 1 1/64 grip diameter x 43/64 inch grip thickness. The mounting hole measures 7.56 inches x 0.43-inch thread depth. This handle has a screw size of M8 x 1.25-inch, is silver in colour, and has a load capacity of 1,100 pounds.
This 45 Degrees off-set tubular-grip pull handle with a centre-to-centre tapped mounting hole is made of aluminum and die-cast zinc with a powder-coated finish. It measures 24.29 x 2.68 inches. It has a 1 3/16 grip diameter x 1 3/16 inch grip thickness. The mounting hole measures 23.62 inches x 0.59-inch thread depth. This handle has a screw size of M8 x 1.25, is black in colour, and has a load capacity of 427 pounds.
This 45 Degrees off-set tubular-grip pull handle with a centre-to-centre tapped mounting hole is made of aluminum and die-cast zinc with a powder-coated finish. It measures 24.29 x 2.68 inches. It has a 1 3/16 grip diameter x 1 3/16 inch grip thickness. The mounting hole measures 23.62 inches x 0.59-inch thread depth. This handle has a screw size of M8 x 1.25, is black in colour, and has a load capacity of 427 pounds.
This 45 Degrees off-set tubular-grip pull handle with a centre-to-centre tapped mounting hole is made of aluminum and die-cast zinc with a natural anodized finish. It measures 20.36 x 2.68 inches. It has a 1 3/16 grip diameter x 1 3/16 inch grip thickness. The mounting hole measures 19.69 inches x 0.59-inch thread depth. This handle has a screw size of M8 x 1.25, is silver in colour, and has a load capacity of 505 pounds.
This 45 Degrees off-set tubular-grip pull handle with a centre-to-centre tapped mounting hole is made of aluminum and die-cast zinc with a natural anodized finish. It measures 20.36 x 2.68 inches. It has a 1 3/16 grip diameter x 1 3/16 inch grip thickness. The mounting hole measures 19.69 inches x 0.59-inch thread depth. This handle has a screw size of M8 x 1.25, is silver in colour, and has a load capacity of 505 pounds.
This straight tubular-grip pull handle with a centre-to-centre tapped mounting hole is made of aluminum and die-cast zinc with a natural anodized finish. It measures 20.24 x 2.60 inches. It has a 1 7/64 grip diameter x 1 7/64 inch grip thickness. The mounting hole measures 19.69 inches x 0.59-inch thread depth. This handle has a screw size of M8 x 1.25 inches, is silver in colour, and has a load capacity of 337 pounds.
This straight tubular-grip pull handle with a centre-to-centre tapped mounting hole is made of aluminum and die-cast zinc with a natural anodized finish. It measures 20.24 x 2.60 inches. It has a 1 7/64 grip diameter x 1 7/64 inch grip thickness. The mounting hole measures 19.69 inches x 0.59-inch thread depth. This handle has a screw size of M8 x 1.25 inches, is silver in colour, and has a load capacity of 337 pounds.
Surface mounted chest handle is for use on chests, crates and storage boxes. Heavy steel handle with large bail allows forfirm, comfortable grip. Screws can be driven on all sizes with out raising bail. Size no. 4-3/4, wire diameter 13/32 in, plate size 4-7/8 in x 4-3/16 in Zinc plated finish.
Surface mounted chest handle is for use on chests, crates and storage boxes. Heavy steel handle with large bail allows forfirm, comfortable grip. Screws can be driven on all sizes with out raising bail. Size no. 4-3/4, wire diameter 13/32 in, plate size 4-7/8 in x 4-3/16 in Zinc plated finish.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.