Corded angle grinders rotate grinding wheels to remove surface material or rotate cut-off wheels to cut through material. Their head is set at a right angle to the tool body, making them more compact than vertical grinders and allowing for better visibility of the wheel and the work surface. Grinders with side handles allow a two-handed grip to improve stability and control. Angle grinders are commonly used to grind welds, prepare metal and concrete surfaces, bevel cutting tools and material edges, cut metal plates and pipe, and polish concrete, stone, and metal. These tools plug into an outlet to allow longer run times than cordless tools, so they are well suited for repetitive tasks and applications where portability isn't a concern. They maintain full power during operation and don't have batteries that require recharging.
This Super 5 corded angle grinder has a trigger lock-on bottom switch and operates at 18V/10.5A. It has a maximum speed of 11000 RPM and a ⅝"-11 thread spindle. The angle grinder has a wheel of five-inch diameter, a safety clutch, and burn-out protection. It includes five-inch cutting discs and features ventilated charging system.
This Super 5 corded angle grinder has a trigger lock-on bottom switch and operates at 18V/10.5A. It has a maximum speed of 11000 RPM and a ⅝"-11 thread spindle. The angle grinder has a wheel of five-inch diameter, a safety clutch, and burn-out protection. It includes five-inch cutting discs and features ventilated charging system.
This DWE series corded angle grinder has a side slide switch and operates at 120V/13A. It has a maximum speed of 9000 RPM and a ⅝"-11 thread spindle. The standard head angle grinder has two conductors, a wheel of six-inch diameter, a four-foot cord, and a barrel grip. It includes a guard, grinding wheel, and wrench.
This DWE series corded angle grinder has a side slide switch and operates at 120V/13A. It has a maximum speed of 9000 RPM and a ⅝"-11 thread spindle. The standard head angle grinder has two conductors, a wheel of six-inch diameter, a four-foot cord, and a barrel grip. It includes a guard, grinding wheel, and wrench.
This RSEV heavy-duty corded angle grinder has a side slide switch and operates at 120V/14.5A. It has a speed ranging from 2800 to 9600 RPM and a ⅝"-11 UNC thread spindle. The standard head angle grinder has a 13-foot cord, a barrel grip, and a wheel of 4½-inch and five-inch diameter. It includes a side handle and inner support flange.
This RSEV heavy-duty corded angle grinder has a side slide switch and operates at 120V/14.5A. It has a speed ranging from 2800 to 9600 RPM and a ⅝"-11 UNC thread spindle. The standard head angle grinder has a 13-foot cord, a barrel grip, and a wheel of 4½-inch and five-inch diameter. It includes a side handle and inner support flange.
This WEPBA heavy-duty corded angle grinder has a bottom lock-off paddle switch and operates at 120V/15A. It has a maximum speed of 10000 RPM and a ⅝"-11 UNC thread spindle. The standard head angle grinder has a wheel of five-inch diameter, an eight-foot cord, and a rat tail grip. It includes an inner flange and a quick flange nut.
This WEPBA heavy-duty corded angle grinder has a bottom lock-off paddle switch and operates at 120V/15A. It has a maximum speed of 10000 RPM and a ⅝"-11 UNC thread spindle. The standard head angle grinder has a wheel of five-inch diameter, an eight-foot cord, and a rat tail grip. It includes an inner flange and a quick flange nut.
This WEF series corded angle grinder has a lock-on slide switch and operates at 120V/13.5A. It has a maximum speed of 9600 RPM and a ⅝"-11 UNC thread spindle. The flathead angle grinder has two conductors, a wheel of six-inch diameter, an eight-foot cord, and a barrel grip. It includes an inner flange and quick flange nut.
This WEF series corded angle grinder has a lock-on slide switch and operates at 120V/13.5A. It has a maximum speed of 9600 RPM and a ⅝"-11 UNC thread spindle. The flathead angle grinder has two conductors, a wheel of six-inch diameter, an eight-foot cord, and a barrel grip. It includes an inner flange and quick flange nut.
This DWE series corded angle grinder has a bottom trigger switch and operates at 120V/15A. It has a 4.7 horsepower motor, a maximum speed of 6500 RPM, and a ⅝"-11 thread spindle. The flathead angle grinder has two conductors, a wheel of nine-inch diameter, a six-foot cord, and a rat tail grip. It includes nine-inch guard and rubber case cover.
This DWE series corded angle grinder has a bottom trigger switch and operates at 120V/15A. It has a 4.7 horsepower motor, a maximum speed of 6500 RPM, and a ⅝"-11 thread spindle. The flathead angle grinder has two conductors, a wheel of nine-inch diameter, a six-foot cord, and a rat tail grip. It includes nine-inch guard and rubber case cover.
This corded angle grinder has a lock-on trigger switch and operates at 120V/17A. It has two conductors, a maximum speed of 8500 RPM, and a ⅝"-11 thread spindle. The grinder has a wheel of seven-inch diameter and a 13-foot cord. It includes a guard, a pair of flanges, a handle, and a wrench. The grinder features FEIN high-power motor and flat drive head.
This corded angle grinder has a lock-on trigger switch and operates at 120V/17A. It has two conductors, a maximum speed of 8500 RPM, and a ⅝"-11 thread spindle. The grinder has a wheel of seven-inch diameter and a 13-foot cord. It includes a guard, a pair of flanges, a handle, and a wrench. The grinder features FEIN high-power motor and flat drive head.
This DWE series corded angle grinder has a bottom trigger switch and operates at 120V/15A. It has a 4.9 horsepower motor, a maximum speed of 6500 RPM, and a ⅝"-11 thread spindle. The flathead angle grinder has two conductors, a wheel of seven-inch diameter, a six-foot cord, and a rat tail grip.
This DWE series corded angle grinder has a bottom trigger switch and operates at 120V/15A. It has a 4.9 horsepower motor, a maximum speed of 6500 RPM, and a ⅝"-11 thread spindle. The flathead angle grinder has two conductors, a wheel of seven-inch diameter, a six-foot cord, and a rat tail grip.
This corded fillet weld grinder has a slide trigger switch and operates at 120V. It has two conductors, a speed ranging from 1350 to 3750 RPM, and a 25 millimetre thread spindle. The grinder has a wheel of six-inch diameter and a 13-foot cord. It includes a case, four fleece discs, and a profiling stone.
This corded fillet weld grinder has a slide trigger switch and operates at 120V. It has two conductors, a speed ranging from 1350 to 3750 RPM, and a 25 millimetre thread spindle. The grinder has a wheel of six-inch diameter and a 13-foot cord. It includes a case, four fleece discs, and a profiling stone.
This W series heavy-duty corded angle grinder has a side slide switch and operates at 120V/12A. It has a speed ranging from 8000 to 11000 RPM and an M 14 thread spindle. The standard head angle grinder has an eight-foot cord, a barrel grip, and a wheel of 4½-inch and five-inch diameter. It includes a guard and inner support flange.
This W series heavy-duty corded angle grinder has a side slide switch and operates at 120V/12A. It has a speed ranging from 8000 to 11000 RPM and an M 14 thread spindle. The standard head angle grinder has an eight-foot cord, a barrel grip, and a wheel of 4½-inch and five-inch diameter. It includes a guard and inner support flange.
This WEV series heavy-duty corded angle grinder has a side lock-on slide switch and operates at 120V/13.5A. It has a speed ranging from 2000 to 7600 RPM and a ⅝"-11 UNC thread spindle. The standard head angle grinder has a wheel of six-inch diameter, an eight-foot cord, and a barrel grip. It includes a guard, inner support flange, and spanner wrench.
This WEV series heavy-duty corded angle grinder has a side lock-on slide switch and operates at 120V/13.5A. It has a speed ranging from 2000 to 7600 RPM and a ⅝"-11 UNC thread spindle. The standard head angle grinder has a wheel of six-inch diameter, an eight-foot cord, and a barrel grip. It includes a guard, inner support flange, and spanner wrench.
This WP series heavy-duty corded angle grinder has a bottom paddle switch and operates at 120V/11A. It has a speed ranging from 7500 to 11000 RPM and an M 14 thread spindle. The standard head angle grinder has a 13-foot cord, a barrel grip, and a wheel of 4½-inch and five-inch diameter. It includes an inner support flange and M quick flange nut.
This WP series heavy-duty corded angle grinder has a bottom paddle switch and operates at 120V/11A. It has a speed ranging from 7500 to 11000 RPM and an M 14 thread spindle. The standard head angle grinder has a 13-foot cord, a barrel grip, and a wheel of 4½-inch and five-inch diameter. It includes an inner support flange and M quick flange nut.
This Straight-mate corded angle grinder kit has a lock-on switch and operates at 120V/11.8A. It has a speed of 1600 to 4800 RPM and a ⅝"-11 thread spindle. The kit has two conductors, a wheel of six-inch diameter, and nine-foot cord. It includes stainless disc, Blendex U disc, Blendex drum, polishing paste, and turbo/cotton/wire drums.
This Straight-mate corded angle grinder kit has a lock-on switch and operates at 120V/11.8A. It has a speed of 1600 to 4800 RPM and a ⅝"-11 thread spindle. The kit has two conductors, a wheel of six-inch diameter, and nine-foot cord. It includes stainless disc, Blendex U disc, Blendex drum, polishing paste, and turbo/cotton/wire drums.
This WEPBA corded angle grinder has a paddle switch and operates at 120V/14.5A. It has a maximum speed of 11000 RPM and a ⅝"-11 UNC thread spindle. The angle grinder has two conductors, a wheel of five-inch diameter, and an eight-foot cord. It includes a five-inch Type-27 guard, anti-vibration side handle, and quick flange nut.
This WEPBA corded angle grinder has a paddle switch and operates at 120V/14.5A. It has a maximum speed of 11000 RPM and a ⅝"-11 UNC thread spindle. The angle grinder has two conductors, a wheel of five-inch diameter, and an eight-foot cord. It includes a five-inch Type-27 guard, anti-vibration side handle, and quick flange nut.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.